Waveshare 16-Channel 12-bit I2C Servo Driver HAT for Raspberry Pi

Description

About The Product
Needless to say, the Raspberry Pi is powerful enough in most cases, yet it is not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver HAT for you.

Features
1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
2. I2C controlled, using only 2 pins
3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
4. Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
5. Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.
6. Reserved I2C control pins, allows to work with other control boards
7. Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control)

Specifications
1. Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
2. Servo voltage: 5V
3. Logic voltage: 3.3V
4. Driver: PCA9685
5. Control interface: I2C
6. Dimension: 65mm x 30mm
7. Mounting hole size: 3.0mm
8. Supported Servo

This HAT can be used to drive servos such as:
- SG90 Servo
- MG90S Servo
- MG996R Servo

Package List
1. Servo Driver HAT x1
2. RPi screws pack (2pcs) x1

Note: Raspberry Pi and servos are NOT included.

Waveshare 16-Channel 12-bit I2C Servo Driver HAT for Raspberry Pi

Product form

SKU: DIY0190

  • In stock (Processing Time 1 - 72 hours)

€29,08

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    About The Product
    Needless to say, the Raspberry Pi is powerful enough in most cases, yet it is not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver HAT for you.

    Features
    1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
    2. I2C controlled, using only 2 pins
    3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
    4. Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
    5. Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.
    6. Reserved I2C control pins, allows to work with other control boards
    7. Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control)

    Specifications
    1. Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
    2. Servo voltage: 5V
    3. Logic voltage: 3.3V
    4. Driver: PCA9685
    5. Control interface: I2C
    6. Dimension: 65mm x 30mm
    7. Mounting hole size: 3.0mm
    8. Supported Servo

    This HAT can be used to drive servos such as:
    - SG90 Servo
    - MG90S Servo
    - MG996R Servo

    Package List
    1. Servo Driver HAT x1
    2. RPi screws pack (2pcs) x1

    Note: Raspberry Pi and servos are NOT included.

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account