Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS

Description

L76X Multi-GNSS HAT for Raspberry Pi, Supports GPS, BDS, QZSS

Overview
1. This is a Raspberry Pi GNSS HAT which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.
2. It is an easy way to enable global positioning function for your Raspberry Pi.

Features
1. Support Multi-GNSS systems: GPS, BDS, and QZSS
2. EASY, self track prediction technology, help quick positioning
2. AlwaysLocate, intelligent controller of periodic mode for power saving
3. Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
4. UART communication baudrate: 4800~115200bps (9600bps by default)
5. Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
6. 4x LEDs for indicating the module working status
7. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

GNSS Specifications
1. Band: GPS L1(1575.42Mhz), BD2 B1 (1561.098MHz)
- Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch
- C/A code
- SBA: WAAS, EGNOS, MSAS, GAGAN
2. Horizontal position accuracy:
- Autonomous: <2.5mCEP
3. Time-To-First-Fix @-130dBm (EASY™ enabled):
- Cold starts: <15s
- Warm starts: <5s
- Hot starts: <1s
4. Sensitivity:
- Acquisition: -148dBm
- Tracking: -163dBm
- Re-acquisition: -160dBm
5. Dynamic performance:
- Altitude (max): 18000m
- Velocity (max): 515m/s
- Acceleration (max): 4G

General Specifications
1. Communication interface: UART
2. Baudrate: 4800~115200bps (9600bps by default)
3. Update rate: 1Hz (default), 10Hz (max)
4. Protocols: NMEA 0183, PMTK
5. Power supply voltage: 5V / 3.3V
6. Operating current: 13mA
7. Operating temperature: -40 degree C ~ 85 degree C
8. Dimensions: 65mm x 30.5mm

Applications
1. Vehicle tracking
2. Asset tracking
3. Security system
4. Industrial PDA
5. GIS application

What is on Board
1. L76B module
2. CP2102: USB TO UART converter
3. CAT24C32: EEPROM
4. RT9193-33: Power manager
5. Backup mode wakeup button
6. Standby switch
7. Indicators:
- RXD/TXD: UART RX/TX indicator
- PPS: GPS status indicator
- PWR: Power indicator
8. Raspberry Pi GPIO connector: For connecting with Raspberry Pi
9. USB TO UART port
10. GNSS antenna connector
11. Battery holder: Support ML1220 rechargeable battery, for preserving ephemeris information and hot starts
12. UART selection jumpers
- A: control the L76B through USB TO UART
- B: control the L76B through Raspberry Pi
- C: access Raspberry Pi through USB TO UART

Package Contents
1. L76X GPS HAT x1
2. GPS External Antenna (B) x1
3. USB type A plug to micro plug cable x1
4. RPi screws pack (2pcs) x1
5. 2x20PIN pinheader x1

Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS

Product form

SKU: ZY15477389

  • In stock (Processing Time 1 - 72 hours)

€47,53

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    L76X Multi-GNSS HAT for Raspberry Pi, Supports GPS, BDS, QZSS

    Overview
    1. This is a Raspberry Pi GNSS HAT which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.
    2. It is an easy way to enable global positioning function for your Raspberry Pi.

    Features
    1. Support Multi-GNSS systems: GPS, BDS, and QZSS
    2. EASY, self track prediction technology, help quick positioning
    2. AlwaysLocate, intelligent controller of periodic mode for power saving
    3. Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
    4. UART communication baudrate: 4800~115200bps (9600bps by default)
    5. Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
    6. 4x LEDs for indicating the module working status
    7. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    GNSS Specifications
    1. Band: GPS L1(1575.42Mhz), BD2 B1 (1561.098MHz)
    - Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch
    - C/A code
    - SBA: WAAS, EGNOS, MSAS, GAGAN
    2. Horizontal position accuracy:
    - Autonomous: <2.5mCEP
    3. Time-To-First-Fix @-130dBm (EASY™ enabled):
    - Cold starts: <15s
    - Warm starts: <5s
    - Hot starts: <1s
    4. Sensitivity:
    - Acquisition: -148dBm
    - Tracking: -163dBm
    - Re-acquisition: -160dBm
    5. Dynamic performance:
    - Altitude (max): 18000m
    - Velocity (max): 515m/s
    - Acceleration (max): 4G

    General Specifications
    1. Communication interface: UART
    2. Baudrate: 4800~115200bps (9600bps by default)
    3. Update rate: 1Hz (default), 10Hz (max)
    4. Protocols: NMEA 0183, PMTK
    5. Power supply voltage: 5V / 3.3V
    6. Operating current: 13mA
    7. Operating temperature: -40 degree C ~ 85 degree C
    8. Dimensions: 65mm x 30.5mm

    Applications
    1. Vehicle tracking
    2. Asset tracking
    3. Security system
    4. Industrial PDA
    5. GIS application

    What is on Board
    1. L76B module
    2. CP2102: USB TO UART converter
    3. CAT24C32: EEPROM
    4. RT9193-33: Power manager
    5. Backup mode wakeup button
    6. Standby switch
    7. Indicators:
    - RXD/TXD: UART RX/TX indicator
    - PPS: GPS status indicator
    - PWR: Power indicator
    8. Raspberry Pi GPIO connector: For connecting with Raspberry Pi
    9. USB TO UART port
    10. GNSS antenna connector
    11. Battery holder: Support ML1220 rechargeable battery, for preserving ephemeris information and hot starts
    12. UART selection jumpers
    - A: control the L76B through USB TO UART
    - B: control the L76B through Raspberry Pi
    - C: access Raspberry Pi through USB TO UART

    Package Contents
    1. L76X GPS HAT x1
    2. GPS External Antenna (B) x1
    3. USB type A plug to micro plug cable x1
    4. RPi screws pack (2pcs) x1
    5. 2x20PIN pinheader x1

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Login

    Forgot your password?

    Don't have an account yet?
    Create account