Waveshare SX1262 LoRa HAT 915MHz Frequency Band for Raspberry Pi, Applicable for America / Oceania / Asia

Description

Overview
1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.
2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.

Features
1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
2. Onboard CP2102 USB TO UART converter, for serial debugging
3. Bring the UART control interface, for connecting host boards like Arduino/STM32
4. 4x LED indicators, easy to check the module status
5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference
6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications
8. Customizable communication key which wont be retrieved, greatly improves the security of user data
9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment
10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network
11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter
12. Support fixed-point transmission, broadcast, signal channel monitor
13. Come with development resources and manual (examples for Raspberry Pi/STM32)

What is on Board
1. SX1262 LoRa module
2. 74HC125V: voltage level translator
3. CP2102: USB TO UART converter
4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi
5. USB TO UART port
6. UART header: for connecting host boards like STM32/Arduino
7. SMA antenna connector
8. IPEX antenna connector
9. Indicators:
- RXD/TXD: UART RX/TX indicator
- AUX: auxiliary indicator
- PWR: power indicator
10. UART selection jumpers
- A: Control the LoRa module through USB TO UART
- B: Control the LoRa module through Raspberry Pi
- C: Access Raspberry Pi through USB TO UART
11. LoRa mode selection jumpers
- Short M0, short M1: Transmission mode
- Short M0, open M1: Configuration mode
- Open M0, short M1: WOR mode
- Open M0, open M1: deep sleep mode

Specification
1. RF module: SX1262
2. Frequency band: 850.125 ~ 930.125MHz
3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)
4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)
5. Receive sensitivity: -147dBm (radio rate 2.4kbps)
6. Power consumption:
- Transmit current: 133mA (transient consumption)
- Receive current: 11mA
- Sleep current: 2uA (LoRa module software shutoff)
7. Communication interface: UART (TTL level)
8. Baudrate: 1200bps ~ 115200bps (9600bps by default)
9. Packet length: 240 Byte (32/64/128/240 Byte programmable)
10. Cache: 1000 Byte
11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)
12. Power supply: 5V
13. Logic level: 3.3V/5V
14. Operating temperature: -40~85 degree C
15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications
16. Dimensions: 7cm x 12cm x 2cm
17. Weight: 69g
18. Packing List:
- SX1262 915MHz LoRa HAT x1
- USB type A plug to micro plug cable x1
- 915MHz antenna x1

Waveshare SX1262 LoRa HAT 915MHz Frequency Band for Raspberry Pi, Applicable for America / Oceania / Asia

Product form

SKU: ZY23017425

  • In stock (Processing Time 1 - 72 hours)

€48,30

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    Overview
    1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.
    2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
    3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.

    Features
    1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
    2. Onboard CP2102 USB TO UART converter, for serial debugging
    3. Bring the UART control interface, for connecting host boards like Arduino/STM32
    4. 4x LED indicators, easy to check the module status
    5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference
    6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
    7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications
    8. Customizable communication key which wont be retrieved, greatly improves the security of user data
    9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment
    10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network
    11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter
    12. Support fixed-point transmission, broadcast, signal channel monitor
    13. Come with development resources and manual (examples for Raspberry Pi/STM32)

    What is on Board
    1. SX1262 LoRa module
    2. 74HC125V: voltage level translator
    3. CP2102: USB TO UART converter
    4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi
    5. USB TO UART port
    6. UART header: for connecting host boards like STM32/Arduino
    7. SMA antenna connector
    8. IPEX antenna connector
    9. Indicators:
    - RXD/TXD: UART RX/TX indicator
    - AUX: auxiliary indicator
    - PWR: power indicator
    10. UART selection jumpers
    - A: Control the LoRa module through USB TO UART
    - B: Control the LoRa module through Raspberry Pi
    - C: Access Raspberry Pi through USB TO UART
    11. LoRa mode selection jumpers
    - Short M0, short M1: Transmission mode
    - Short M0, open M1: Configuration mode
    - Open M0, short M1: WOR mode
    - Open M0, open M1: deep sleep mode

    Specification
    1. RF module: SX1262
    2. Frequency band: 850.125 ~ 930.125MHz
    3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)
    4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)
    5. Receive sensitivity: -147dBm (radio rate 2.4kbps)
    6. Power consumption:
    - Transmit current: 133mA (transient consumption)
    - Receive current: 11mA
    - Sleep current: 2uA (LoRa module software shutoff)
    7. Communication interface: UART (TTL level)
    8. Baudrate: 1200bps ~ 115200bps (9600bps by default)
    9. Packet length: 240 Byte (32/64/128/240 Byte programmable)
    10. Cache: 1000 Byte
    11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)
    12. Power supply: 5V
    13. Logic level: 3.3V/5V
    14. Operating temperature: -40~85 degree C
    15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications
    16. Dimensions: 7cm x 12cm x 2cm
    17. Weight: 69g
    18. Packing List:
    - SX1262 915MHz LoRa HAT x1
    - USB type A plug to micro plug cable x1
    - 915MHz antenna x1

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Login

    Forgot your password?

    Don't have an account yet?
    Create account