Bestselling Products

1. Easy to install, easy to use2. Strong and durable material, not easy to damage3. Effective protection of the lens, does not affect the use4. Applicable models: for DJI O3 sky end5. Use: lens module housing frame

Read more less

1. Applicable models: DJI O3 FPV Air Unit Module2. Using 3D printing technology, accurate hole position3. Using high-quality materials, durable and not easy to break4. Simple installation, convenient and quick5. Weight: 10g

Read more less

1. Material: plastic2. Stable transmission signal3. Good compatibility4. Not easy to rust, durable5. Suitable for: DJI Air 2S6. Function: responsible for the transmission of image transmission signals7. Weight: 10g

Read more less

1. Single item accessory of the map transfer module for maintenance and replacement, without coaxial cable and camera, quick release design for quick replacement.2. Dimensions: length 32.5 mm, width 30.5 mm, height 14.5 mm3. Weight: about 28 grams4. Communication frequency:-2.400-2.4835 GHz (receive signal only)-5.725-5.850 GHz (receive and transmit signals)5. Transmitted power (EIRP):-FCC: less than 33 dBm-CE: less than 14 dBm-SRRC: less than 30 dBm6. Operating ambient temperature: -10 -40 degrees Celsius7. Transmission distance: 10 km (FCC), 2 km (CE), 6 km (SRRC)

Read more less

1. Dual-band dual-polarized omni-directional antenna with strong anti-interference capability for long-distance transmission.2. Equipped with I-PEX connector, small size and light weight.3. Adapted products: for DJI O3 Air Unit4. Weight: about 3 grams5. Length: 85 mmPacking list: DJI O3 Air Unit Antenna × 1

Read more less

1. The highest image quality of 1080p/100fps, the picture transmission can transfer up to 10 km clearly and smoothly, with a bit rate of up to 50Mbps and latency as low as 30 milliseconds, and support H.265 video encoding, revolutionizing the image transmission experience.2. 1/1.7-inch sensor for 155-degree ultra-wide angle 4K/60fps video with ultra-clear image quality for richer detail and 20GB built-in storage; D-Cinelike color mode for detailed color adjustment and a camera module that can be used with Avata ND mirror kit (8/16/32).3. Canvas mode compatible: support Canvas mode and customize the OSD information displayed on the Goggles 2 and FPV Goggles V2 screens, as well as adjust the PID parameters yourself, thus enhancing the playability of the whole system.4. Lightweight body has wider compatibility, allowing flexible combination assembly. The Goggles 2 and DJI FPV Remote 2 are also smaller in size, reducing the overall storage volume and making them easier to carry around.5. Compatible products: for DJI Goggles 2/DJI FPV Goggles V2/DJI FPV Remote Control 2Packing list:O3 Air Unit Camera Module ×1O3 Air Unit Graphic Transmission Module ×1O3 Air Unit Antenna ×1O3 Air Unit 3-in-1 connection cable ×1

Read more less

1. Quickly connectable to the air unit module interface2. Power and signal cables are marked with different colors3. Easy to assemble and disassemble, lightweight design4. Length: 100 mm5. Adapted products: for DJI O3 Air Unit

Read more less

1. Use with DJI O3 Air Unit for repair and replacement.2. Dimensions: length 21.2 mm, width 20 mm, height 19.5 mm3. Weight (including coaxial cable): about 8.3 grams4. Coaxial cable length: 115 mm5. Image sensor: 1/1.7-inch image sensor, effective 48 million pixels6. Lens: Field of view (FOV): 155 degrees7. Equivalent focal length: 12.7 mm8. Actual focal length: 2.34 mm9. Aperture: f/2.810. Focusing mode: FF11. Focus range: 0.6 m to infinity12. ISO range: 100-6400 (auto), 100-25600 (manual)13. Shutter: Rolling shutter14. Video resolution:-with Goggles 2: 4K-50/60fps, 2.7K-50/60/100fps, 1080p-50/60/100fps-with FPV Goggles V2: 4K-50/60fps, 2.7K-50/60/100/120fps, 1080p-50/60/100/120fpsVideo format: MP4Packing list:DJI O3 Air Unit camera module × 1Coaxial cable ×1Screws (M2×4) ×4

Read more less

1. Applicable models: DJI O3 FPV Air Unit Module2. Using 3D printing, accurate hole position3. Using M2 metal nuts, strong and durable4. Installation specification: 20x205. Screw compatibility: M26. Size: 37.5 x 20mm8. Weight: 5.5gPacking list: -3D snap x 2pcs-M2 hexagonal nuts x 4 pcs

Read more less

1. Applicable models: DJI O3 FPV Air Unit Module2. Using 3D printing, accurate hole position3. High-quality plastic M3 nuts, durable and not easy to break4. Installation specification: 20x205. Screw compatibility: M36. Size: 37.5 x 20mm8. Weight: 5.5gPacking list: -3D snap x 2pcs-M3 hexagonal nuts x 4 pcs

Read more less

1. Applicable models: DJI O3 FPV Air Unit Module2. Using 3D printing technology, accurate hole position3. Using high-quality materials, durable and not easy to break4. Simple installation, convenient and quick5. Weight: 10g

Read more less

1. Shock absorbing plate for DJI INSPIRE 2 2. Replace damaged or unusable ones with new ones.3. Easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair department

Read more less

1. Made of high quality material, which is both reliable and durable, very sturdy.2. Repair accessories for accidental damage replacement, making maintenance more worry-free.3. Compact design of GPS data cable, very easy to wire on small drones.4. Easy to install, remove and wire for Air 2S drone.5. Material: plastic + electronic components6. Weight: about 3g

Read more less

1. Double layer quick release plate for DJI RS 3 Mini design, using Arca standard, easy to switch between photo tripods2. The upper quick release plate retaining edge design, can effectively prevent the screws and camera loose3. Easy to use, easy to install4. Made of high quality materials, sturdy and durable5. Applicable products: DJI RS 3 Mini6. Packing list:- RS Mini quick release plate x 1- Half-moon ring camera fixing screw (inch 1/4-20) x 1- Fixing screw (inch 1/4-20) x 1

Read more less

1. For DJI Zenmuse X9-6K/DJI Zenmuse X9-8K2. The LiDAR rangefinder can project 43200 ranging points3. Detection distance up to 10 meters4. The laser focus system does not damage the image quality, but also can focus faster5. No need to rely on object textures, especially practical in low-light environments6. LiDAR laser focus system lowers the operating threshold of manual focus7. Through the visual assisted follow focus technology, the distance measurement point data is projected on the body monitor and the image transmission monitor in real time in the form of a top view, and the photographer can quickly locate and accurately track the focus through the novel and intuitive LiDAR oscilloscope8. Even if you don't have rich experience in focusing, you can get started in a short timePacking list:- LiDAR Rangefinder x 1- Dedicated cable for LiDAR rangefinder/focus motor x 2

Read more less

1. For DJI Zenmuse X9-6K; DJI Zenmuse X9-8K2. The Zenmuse X9 gimbal camera can use the L-mount lens group through the L-mount component3. The X9 adopts a replaceable bayonet design, which not only supports the DL bayonet independently developed by DJI, but also supports the L bayonet4. Some lenses of the L mount support functions such as aperture adjustment and automatic focus, and creators can freely choose according to shooting needs5. Weight: about 120 grams6. Bayonet structure width: length 97 mm, width 80 mmPacking list:- L-mount adapter ring x 1- L-mount camera protective cover x 1- DX mount lens protection cap x 1

Read more less

1. Precise positioning2. The fixture can clamp flex tightly3. Applicate for iPhone 11/11 Pro/11 Pro Max/12/12 Pro/12 mini/12 Pro Max4. Firm and durable5. Easy to operate

Read more less

1. Contains soft silicone, and does not damage the screen2. Used for screen support and fixation, no need to remove cables, convenient and fast3. Warped screen repair, degumming repair4. Suitable for screen fixing/screen bonding/screen pressing5. This flexible double-ended clip supports the phone opening very well, making it easier for you to repair your phone. It can also be used for pressure bonding of mobile phone screens

Read more less

1. Material: metal2. Applicable models: for DJI Inspire 23. The original machine mold opening, precise hole position4. Easy to install, equipped with screws5. Two motors, you can choose according to your needs6. Product weight: 140 grams7. Packing: OPP+bubble bag

Read more less

1. Material: metal2. Applicable models: for DJI Inspire 23. The original machine mold opening, precise hole position4. Easy to install, equipped with screws5. Two motors, you can choose according to your needs6. Product weight: 140 grams7. Packing: OPP+bubble bag

Read more less

1. Withstand voltage: 1000V2. Current resistance: 20A3. Pen length: 134mm4. Wire length: 1.18m5. Universal multimeter jack with 4mm diameter plug ,strong overload capacity, safer to use6. Good electrical conductivity, double insulation soft silicone injection, more secure

Read more less

1. Easy operation, easy to learn the skills, work very fast!2. All in 1 machine, save space and no need mold and bubble remover.3. Smart Constant Pressure; Automatic Lamination and Debubbling Mode.4. Fit for all the touch screen phones under 8.5".5. Automatic Lock cover, do not need to screw any more.6. 3 in 1 separating laminating defoaming machine7. Built-in vacuum pump8. Built-in air compressor9. Small size and light weight

Read more less

1. Intelligent screen defoamer, 15-inch defoaming space, integrated forming chamber self-locking buckle inductor, built-in silent air compressor 2. Integrated air compressor/Super large working chamber/Multifunctional integrated machine/Simple operation 3. Super large working cabin, mobile phone, tablet, etc, smart devices can be put into the defoaming 4. Multifunctional integrated machine, a combination of a large defoamer and silent air compressor 5. More than just removing bubbles, it can also be used as an air compressor, connecting the output air pipe to provide an air supply for the laminating machine and other machines 6. Aviation aluminum integrated warehouse, integrated forming of the bin, more sealed without air leakage, a better defoaming effect 7. Built-in ultra silent air pump, the air pumping noise is lower than 50dB 8. Equipped with a self-locking sensor, when the door is not closed tightly, the air pump cannot work normally without air intake 9. Power: 400W 10. Noise: 1-50dB 11. Product size: 400*283*320mm 12. Net weight: 28kg

Read more less

1. Mobile phone maintenance intelligent cutting curved screen grinding chip all-in-one machine2. High precision multi-directional limit free adjustment high-speed aero motor3. Free switching between cutting and grinding, one machine for two purposes4. Cutting curved screen and polishing IC chip flexible switching5. Aviation brushless motor, high reliability, step-less variable, frequency speed regulation6. Low energy consumption and low noise7. Limit suspension cutting screen, flexible cutting of straight screen-curved screen multiple screens8. Multiple protection/Limit cutting piece/Safe and reliable9. Cutting multiple adjustments, adaptive to different heights, suspension limit cutting retine on10. Water bottle rack design, place water bottle, easy to catch water, not easy to fall11. Equipped with emery grinding head, precise grinding depth12. The proper amount of water can be adjusted, to reduce dust flying, increase cutting heat dissipation13. Stepless regulating motor speed14. The platform can tilt left and right, convenient for work15. Adjust fixed mobile phone Convenient for work16. Adopt a linear guide rail and add a bilateral stop block17. The water inlet can be connected outlet18. The motor can be adjusted left and right, and precise positioning

Read more less

1. Intelligent screen defoamer, 15-inch defoaming space, integrated forming chamber self-locking buckle inductor, built-in silent air compressor 2. Integrated air compressor/Super large working chamber/Multifunctional integrated machine/Simple operation 3. Super large working cabin, mobile phone, tablet, etc, smart devices can be put into the defoaming 4. Multifunctional integrated machine, a combination of a large defoamer and silent air compressor 5. More than just removing bubbles, it can also be used as an air compressor, connecting the output air pipe to provide an air supply for the laminating machine and other machines 6. Aviation aluminum integrated warehouse, integrated forming of the bin, more sealed without air leakage, a better defoaming effect 7. Built-in ultra silent air pump, the air pumping noise is lower than 50dB 8. Equipped with a self-locking sensor, when the door is not closed tightly, the air pump cannot work normally without air intake 9. Power: 400W 10. Noise: 1-50dB 11. Product size: 400*283*320mm 12. Net weight: 28kg

Read more less

1. Intelligent screen defoamer, 15-inch defoaming space, integrated forming chamber self-locking buckle inductor, built-in silent air compressor 2. Integrated air compressor/Super large working chamber/Multifunctional integrated machine/Simple operation 3. Super large working cabin, mobile phone, tablet, etc, smart devices can be put into the defoaming 4. Multifunctional integrated machine, a combination of a large defoamer and silent air compressor 5. More than just removing bubbles, it can also be used as an air compressor, connecting the output air pipe to provide an air supply for the laminating machine and other machines 6. Aviation aluminum integrated warehouse, integrated forming of the bin, more sealed without air leakage, a better defoaming effect 7. Built-in ultra silent air pump, the air pumping noise is lower than 50dB 8. Equipped with a self-locking sensor, when the door is not closed tightly, the air pump cannot work normally without air intake 9. Power: 400W 10. Noise: 1-50dB 11. Product size: 400*283*320mm 12. Net weight: 28kg

Read more less

1. Mobile phone maintenance intelligent cutting curved screen grinding chip all-in-one machine2. High precision multi-directional limit free adjustment high-speed aero motor3. Free switching between cutting and grinding, one machine for two purposes4. Cutting curved screen and polishing IC chip flexible switching5. Aviation brushless motor, high reliability, step-less variable, frequency speed regulation6. Low energy consumption and low noise7. Limit suspension cutting screen, flexible cutting of straight screen-curved screen multiple screens8. Multiple protection/Limit cutting piece/Safe and reliable9. Cutting multiple adjustments, adaptive to different heights, suspension limit cutting retine on10. Water bottle rack design, place water bottle, easy to catch water, not easy to fall11. Equipped with emery grinding head, precise grinding depth12. The proper amount of water can be adjusted, to reduce dust flying, increase cutting heat dissipation13. Stepless regulating motor speed14. The platform can tilt left and right, convenient for work15. Adjust fixed mobile phone Convenient for work16. Adopt a linear guide rail and add a bilateral stop block17. The water inlet can be connected outlet18. The motor can be adjusted left and right, and precise positioning

Read more less

1. Intelligent lamination and defoaming integrated machine, 125mm large rod cylinder, the four guide rods fit smoothly, 15-inch large capacity integrated warehouse2. Three in one vacuum lamination, curved screen mobile phone/straight screen mobile phone/tablet computer3. The four guide rods and the cylinder shaft are pressed and laminated synchronously and stably4. 15-inch large capacity warehouse, meeting most mobile phones / tablets on the market5. Within 15 inches of tablet equipment, at present, the size of most tablet devices in the market are 7/8/9.7/10.1/12.9, etc6. All brands of curved-screen mobile phones can be laminated to remove bubbles Multiple mobile phones can also work at the same time7. All brands of direct-screen mobile phones can be laminated to remove bubbles Multiple mobile phones can also, work at the same time8. The intelligent and convenient system, fast, convenient, and accurate, Humanized interface, simple design, easy operation9. Models of various brands, quick select, the models of various brands match the parameters quickly, making the lamination more accurate10. Aviation aluminum all-in-one chamber, integrated forming of the bin, more sealed without air leakage, laminated defoaming effect is better11. Adaptive inductive lock, multiple guarantees, equipped with a self-locking sensor, when the door is not closed tightly, the air pump cannot work normally without air intake

Read more less

1. Intelligent screen defoamer, 15-inch defoaming space, integrated forming chamber self-locking buckle inductor, built-in silent air compressor 2. Integrated air compressor/Super large working chamber/Multifunctional integrated machine/Simple operation 3. Super large working cabin, mobile phone, tablet, etc, smart devices can be put into the defoaming 4. Multifunctional integrated machine, a combination of a large defoamer and silent air compressor 5. More than just removing bubbles, it can also be used as an air compressor, connecting the output air pipe to provide an air supply for the laminating machine and other machines 6. Aviation aluminum integrated warehouse, integrated forming of the bin, more sealed without air leakage, a better defoaming effect 7. Built-in ultra silent air pump, the air pumping noise is lower than 50dB 8. Equipped with a self-locking sensor, when the door is not closed tightly, the air pump cannot work normally without air intake 9. Power: 400W 10. Noise: 1-50dB 11. Product size: 400*283*320mm 12. Net weight: 28kg

Read more less

1. Intelligent lamination and defoaming integrated machine, 125mm large rod cylinder, the four guide rods fit smoothly, 15-inch large capacity integrated warehouse2. Three in one vacuum lamination, curved screen mobile phone/straight screen mobile phone/tablet computer3. The four guide rods and the cylinder shaft are pressed and laminated synchronously and stably4. 15-inch large capacity warehouse, meeting most mobile phones / tablets on the market5. Within 15 inches of tablet equipment, at present, the size of most tablet devices in the market are 7/8/9.7/10.1/12.9, etc6. All brands of curved-screen mobile phones can be laminated to remove bubbles Multiple mobile phones can also work at the same time7. All brands of direct-screen mobile phones can be laminated to remove bubbles Multiple mobile phones can also, work at the same time8. The intelligent and convenient system, fast, convenient, and accurate, Humanized interface, simple design, easy operation9. Models of various brands, quick select, the models of various brands match the parameters quickly, making the lamination more accurate10. Aviation aluminum all-in-one chamber, integrated forming of the bin, more sealed without air leakage, laminated defoaming effect is better11. Adaptive inductive lock, multiple guarantees, equipped with a self-locking sensor, when the door is not closed tightly, the air pump cannot work normally without air intake

Read more less

1. Intelligent lamination and defoaming integrated machine, 125mm large rod cylinder, the four guide rods fit smoothly, 15-inch large capacity integrated warehouse2. Three in one vacuum lamination, curved screen mobile phone/straight screen mobile phone/tablet computer3. The four guide rods and the cylinder shaft are pressed and laminated synchronously and stably4. 15-inch large capacity warehouse, meeting most mobile phones / tablets on the market5. Within 15 inches of tablet equipment, at present, the size of most tablet devices in the market are 7/8/9.7/10.1/12.9, etc6. All brands of curved-screen mobile phones can be laminated to remove bubbles Multiple mobile phones can also work at the same time7. All brands of direct-screen mobile phones can be laminated to remove bubbles Multiple mobile phones can also, work at the same time8. The intelligent and convenient system, fast, convenient, and accurate, Humanized interface, simple design, easy operation9. Models of various brands, quick select, the models of various brands match the parameters quickly, making the lamination more accurate10. Aviation aluminum all-in-one chamber, integrated forming of the bin, more sealed without air leakage, laminated defoaming effect is better11. Adaptive inductive lock, multiple guarantees, equipped with a self-locking sensor, when the door is not closed tightly, the air pump cannot work normally without air intake

Read more less

1. Intelligent lamination and defoaming integrated machine, 125mm large rod cylinder, the four guide rods fit smoothly, 15-inch large capacity integrated warehouse2. Three in one vacuum lamination, curved screen mobile phone/straight screen mobile phone/tablet computer3. The four guide rods and the cylinder shaft are pressed and laminated synchronously and stably4. 15-inch large capacity warehouse, meeting most mobile phones / tablets on the market5. Within 15 inches of tablet equipment, at present, the size of most tablet devices in the market are 7/8/9.7/10.1/12.9, etc6. All brands of curved-screen mobile phones can be laminated to remove bubbles Multiple mobile phones can also work at the same time7. All brands of direct-screen mobile phones can be laminated to remove bubbles Multiple mobile phones can also, work at the same time8. The intelligent and convenient system, fast, convenient, and accurate, Humanized interface, simple design, easy operation9. Models of various brands, quick select, the models of various brands match the parameters quickly, making the lamination more accurate10. Aviation aluminum all-in-one chamber, integrated forming of the bin, more sealed without air leakage, laminated defoaming effect is better11. Adaptive inductive lock, multiple guarantees, equipped with a self-locking sensor, when the door is not closed tightly, the air pump cannot work normally without air intake

Read more less

1. Easy operation, easy to learn the skills, work very fast!2. All in 1 machine, save space and no need mold and bubble remover.3. Smart Constant Pressure; Automatic Lamination and Debubbling Mode.4. Fit for all the touch screen phones under 8.5".5. Automatic Lock cover, do not need to screw any more.6. 3 in 1 separating laminating defoaming machine7. Built-in vacuum pump8. Built-in air compressor9. Small size and light weight

Read more less

1. Mobile phone maintenance intelligent cutting curved screen grinding chip all-in-one machine2. High precision multi-directional limit free adjustment high-speed aero motor3. Free switching between cutting and grinding, one machine for two purposes4. Cutting curved screen and polishing IC chip flexible switching5. Aviation brushless motor, high reliability, step-less variable, frequency speed regulation6. Low energy consumption and low noise7. Limit suspension cutting screen, flexible cutting of straight screen-curved screen multiple screens8. Multiple protection/Limit cutting piece/Safe and reliable9. Cutting multiple adjustments, adaptive to different heights, suspension limit cutting retine on10. Water bottle rack design, place water bottle, easy to catch water, not easy to fall11. Equipped with emery grinding head, precise grinding depth12. The proper amount of water can be adjusted, to reduce dust flying, increase cutting heat dissipation13. Stepless regulating motor speed14. The platform can tilt left and right, convenient for work15. Adjust fixed mobile phone Convenient for work16. Adopt a linear guide rail and add a bilateral stop block17. The water inlet can be connected outlet18. The motor can be adjusted left and right, and precise positioning

Read more less

1. Easy operation, easy to learn the skills, work very fast!2. All in 1 machine, save space and no need mold and bubble remover.3. Smart Constant Pressure; Automatic Lamination and Debubbling Mode.4. Fit for all the touch screen phones under 8.5".5. Automatic Lock cover, do not need to screw any more.6. 3 in 1 separating laminating defoaming machine7. Built-in vacuum pump8. Built-in air compressor9. Small size and light weight

Read more less

1. Mobile phone maintenance intelligent cutting curved screen grinding chip all-in-one machine2. High precision multi-directional limit free adjustment high-speed aero motor3. Free switching between cutting and grinding, one machine for two purposes4. Cutting curved screen and polishing IC chip flexible switching5. Aviation brushless motor, high reliability, step-less variable, frequency speed regulation6. Low energy consumption and low noise7. Limit suspension cutting screen, flexible cutting of straight screen-curved screen multiple screens8. Multiple protection/Limit cutting piece/Safe and reliable9. Cutting multiple adjustments, adaptive to different heights, suspension limit cutting retine on10. Water bottle rack design, place water bottle, easy to catch water, not easy to fall11. Equipped with emery grinding head, precise grinding depth12. The proper amount of water can be adjusted, to reduce dust flying, increase cutting heat dissipation13. Stepless regulating motor speed14. The platform can tilt left and right, convenient for work15. Adjust fixed mobile phone Convenient for work16. Adopt a linear guide rail and add a bilateral stop block17. The water inlet can be connected outlet18. The motor can be adjusted left and right, and precise positioning

Read more less

1. Guidance display real battery data 2. Automatic guidance/test dual function 3. Double LED light reminder, green light/blue light test, red light/yellow light guidance 4. FPC flexible material can be twisted and folded 5. No need to disassemble the battery, extend the test modification data, guide the pop -up window of the mobile phone 6. Note: the flex cable is only for i2C i6S intelligent programmer (SKU: EDA0040191)

Read more less

1. Guidance display real battery data 2. Automatic guidance/test dual function 3. Double LED light reminder, green light/blue light test, red light/yellow light guidance 4. FPC flexible material can be twisted and folded 5. No need to disassemble the battery, extend the test modification data, guide the pop -up window of the mobile phone 6. Note: the flex cable is only for i2C i6S intelligent programmer (SKU: EDA0040191)

Read more less

1. Guidance display real battery data 2. Automatic guidance/test dual function 3. Double LED light reminder, green light/blue light test, red light/yellow light guidance 4. FPC flexible material can be twisted and folded 5. No need to disassemble the battery, extend the test modification data, guide the pop -up window of the mobile phone 6. Note: the flex cable is only for i2C i6S intelligent programmer (SKU: EDA0040191)

Read more less

1. Guidance display real battery data 2. Automatic guidance/test dual function 3. Double LED light reminder, green light/blue light test, red light/yellow light guidance 4. FPC flexible material can be twisted and folded 5. No need to disassemble the battery, extend the test modification data, guide the pop -up window of the mobile phone 6. Note: the flex cable is only for i2C i6S intelligent programmer (SKU: EDA0040191)

Read more less

1. Guidance display real battery data 2. Automatic guidance/test dual function 3. Double LED light reminder, green light/blue light test, red light/yellow light guidance 4. FPC flexible material can be twisted and folded 5. No need to disassemble the battery, extend the test modification data, guide the pop -up window of the mobile phone 6. Note: the flex cable is only for i2C i6S intelligent programmer (SKU: EDA0040191)

Read more less

1. Guidance display real battery data 2. Automatic guidance/test dual function 3. Double LED light reminder, green light/blue light test, red light/yellow light guidance 4. FPC flexible material can be twisted and folded 5. No need to disassemble the battery, extend the test modification data, guide the pop -up window of the mobile phone 6. Note: the flex cable is only for i2C i6S intelligent programmer (SKU: EDA0040191)

Read more less

1. Full automatic dispensing machine, suitable for gluing various dispensing products 2. The dispensing accuracy is 0.02MM and the dispensing amount is 0.01ML 3. The size, thickness, and speed of glue can be adjusted, and powerful process control, no wire drawing, no glue leakage, no glue dripping 4. Autonomous programming path, positioning 1:1 accuracy 5. The pressure regulating valve controls the glue output, the glue is evenly and smoothly discharged 6. Simple operation of autonomous programming 7. Voltage: 110V/220V 8. External connection mode: RS232 9. Program capacity: 1000 groups 10. Product size: 50 x 40 x 56cm 11. External connection mode: RS232 12. Drive mode: Stepping 13. Control system: Motion control card 14. Package includes: - 1 x Host - 1 x Power cable

Read more less

1. Full automatic dispensing machine, suitable for gluing various dispensing products 2. The dispensing accuracy is 0.02MM and the dispensing amount is 0.01ML 3. The size, thickness, and speed of glue can be adjusted, and powerful process control, no wire drawing, no glue leakage, no glue dripping 4. Autonomous programming path, positioning 1:1 accuracy 5. The pressure regulating valve controls the glue output, the glue is evenly and smoothly discharged 6. Simple operation of autonomous programming 7. Voltage: 110V/220V 8. External connection mode: RS232 9. Program capacity: 1000 groups 10. Product size: 50 x 40 x 56cm 11. External connection mode: RS232 12. Drive mode: Stepping 13. Control system: Motion control card 14. Package includes: - 1 x Host - 1 x Power cable

Read more less

1. Full automatic dispensing machine, suitable for gluing various dispensing products 2. The dispensing accuracy is 0.02MM and the dispensing amount is 0.01ML 3. The size, thickness, and speed of glue can be adjusted, and powerful process control, no wire drawing, no glue leakage, no glue dripping 4. Autonomous programming path, positioning 1:1 accuracy 5. The pressure regulating valve controls the glue output, the glue is evenly and smoothly discharged 6. Simple operation of autonomous programming 7. Voltage: 110V/220V 8. External connection mode: RS232 9. Program capacity: 1000 groups 10. Product size: 50 x 40 x 56cm 11. External connection mode: RS232 12. Drive mode: Stepping 13. Control system: Motion control card 14. Package includes: - 1 x Host - 1 x Power cable

Read more less

1. Full automatic dispensing machine, suitable for gluing various dispensing products 2. The dispensing accuracy is 0.02MM and the dispensing amount is 0.01ML 3. The size, thickness, and speed of glue can be adjusted, and powerful process control, no wire drawing, no glue leakage, no glue dripping 4. Autonomous programming path, positioning 1:1 accuracy 5. The pressure regulating valve controls the glue output, the glue is evenly and smoothly discharged 6. Simple operation of autonomous programming 7. Voltage: 110V/220V 8. External connection mode: RS232 9. Program capacity: 1000 groups 10. Product size: 50 x 40 x 56cm 11. External connection mode: RS232 12. Drive mode: Stepping 13. Control system: Motion control card 14. Package includes: - 1 x Host - 1 x Power cable

Read more less

1. Power: 1000W 2. Power Inlet: 110V/220V 3. Intelligent screen polishing machine, built-in silent air pump, built-in liquid circulation, intelligent LCD screen control 4. The water mill is filled with water for polishing, and the scratches on the mobile phone screen are polished and repaired so that each polishing is like using a new machine 5. Professional wool polishing pad, take care of your phone (when the wool polishing pad is polished and polished need to be replaced with a new polishing pad) 6. One machine is multi-purpose, can work with two or four mobile phones at the same time, improve efficiency and avoid waiting time 7. Equipped with electronic constant pressure valve, precise control of airflow 8. Intelligent LCD screen control, simple operation, easy to use 9. Package includes: - 1 x Water mill polishing machine - 1 x Power cable 10. Steps: - Check the water tank inside the machine and add two-thirds of clean water (if the grinding powder is put first, the grinding powder can be put into clean water with a ratio of 1:5 for mixing, that is, 1kg grinding powder and 5L water) - Connect the power supply and turn on the switch - Put the UV-cured waterproof mobile phone and place the polishing tray - Turn on the emergency stop button to display the LCD screen - Select the corresponding (small, medium, and large)fast intelligent grinding and polishing according to the scratch degree - Put polishing powder on the polishing pad during product polishing (better effect in 1 minute and 7 minutes) 11. Note: TBK 938M Built -in 8 repair stations

Read more less

1. Power: 1000W 2. Power Inlet: 110V/220V 3. Intelligent screen polishing machine, built-in silent air pump, built-in liquid circulation, intelligent LCD screen control 4. The water mill is filled with water for polishing, and the scratches on the mobile phone screen are polished and repaired so that each polishing is like using a new machine 5. Professional wool polishing pad, take care of your phone (when the wool polishing pad is polished and polished need to be replaced with a new polishing pad) 6. One machine is multi-purpose, can work with two or four mobile phones at the same time, improve efficiency and avoid waiting time 7. Equipped with electronic constant pressure valve, precise control of airflow 8. Intelligent LCD screen control, simple operation, easy to use 9. Package includes: - 1 x Water mill polishing machine - 1 x Power cable 10. Steps: - Check the water tank inside the machine and add two-thirds of clean water (if the grinding powder is put first, the grinding powder can be put into clean water with a ratio of 1:5 for mixing, that is, 1kg grinding powder and 5L water) - Connect the power supply and turn on the switch - Put the UV-cured waterproof mobile phone and place the polishing tray - Turn on the emergency stop button to display the LCD screen - Select the corresponding (small, medium, and large)fast intelligent grinding and polishing according to the scratch degree - Put polishing powder on the polishing pad during product polishing (better effect in 1 minute and 7 minutes) 11. Note: TBK 938L Built -in 8 repair stations

Read more less