Consumer Electronics

1. DC voltage measurement range: 0V~620V (DC mode), 0.5V~620V (automatic mode) 0.001V, +/-(0.8%+3)2. AC voltage measurement range: 0V~620V (AC mode), 1.0V~620V (automatic mode), 0.001V, +/-(1.2%+5)3. Resistance: 1Ω-10.00Mohm, 0.1ohm, +/-(1.2%+3)4. Capacitance: 0.5uF-1000uF (+/-(3.5%+8), 1000u-6000uF, +/-(4.5%+10), 0.1μF,5. Frequency: 10HZ~1000Hz, 1Hz, +/-(2.0%+10)6. Diode: measuring diode within 1.0V7. Maximum display value: 99998. Automatic shutdown: 5 minutes9. Battery: Li-ion battery 800mAh

Read more less

About the product1. Display panel: 22.5mm x 14mm 2. Total length: 31mm (Including mounting ears) 3. Thickness: 12mm 4. Mounting hole center distance: 27mm 5. Mounting hole diameter: 2.5mm 6. Measure voltage: DC 3.2-30V (2-wires access, red: positive; black: negative) 7. Supply voltage: DC 3.2-30V (collinear) 8. Measurement accuracy: 0.5% (+/- 1 digit) 9. Display: Three 0.36 inch digital LED Tube 10. Refresh rate: about 500mS/times 11. Operating temperature: -10- 65C 12. Reverse polarity protection 13. Used for car/battery car/motorcycle, or other voltage measure

Read more less

About the product1. Soft rod, Anti-slip Frosted material, all sheaths shrouded, sharp cross probe tip 2. Double insulation, sheath type shrouded probe to make sure the efficiency of connection 3. High quality connector, contact more closely, better electrical conductivity 4. Wide applicable range, can used on various kinds of multimeter.

Read more less

About the product1. Compact and portable to hold and operate 2. CMOS integrated circuit 3. Manual measuring range 4. Auto power off, data hold functions 5. LCD backlight display, low voltage indication 6. Over measuring range indication and protectionBasic functions1. Voltage DC: 200mV / 2V / 20V / 200V / 500V Voltage DC Basic accuracy: +/- (0.5%+3) 2. Voltage AC: 200V / 500V Voltage AC Basic accuracy: +/- (0.8%+5) 3. Direct Current: 2mA / 20 mA / 200 mA / 10 A Direct Current Basic accuracy: +/- (0.8%+10) 4. Alternating Current: 2mA / 20 Ma / 200 mA / 20 A Alternating Current Basic accuracy: +/- (2.0%+5) 5. Resistance: 200ohm / 2K ohm / 20K ohm / 200K ohm / 2M ohm Resistance Basic accuracy: +/- (0.8%+3)

Read more less

1. Soft rod, Anti-slip Frosted material, all sheaths shrouded, sharp cross probe tip 2. Double insulation, sheath type shrouded probe to make sure the efficiency of connection 3. High quality connector, contact more closely, better electrical conductivity 4. Wide applicable range, can used on various kinds of multimeter.

Read more less

1. Multimeters is a steady function and highly reliable hand-held measuring instrument 2. The Meter uses large scale of integrated circuit with double integrated A/D converter as its core an 3. The Meter can measure DC current, AC current, DC Voltage, AC Voltage, Resistance etc. 4. Fit for schools, factories, families, and amateur wireless lovers 5. DC Voltage: 0.1V/0.5V/2.5V/10V/50V/250V/1000V 6. AC Voltage: 10V/50V/250V/1000V 7. DC Current: 50uA/2.5mA/25mA/250mA

Read more less

1. Self-recovery full protection. 2. Large LCD screen. 3. Capacitance measured by test leads, easy to use. 4. Continuity test, great beep sound. 5. Auto power off function.

Read more less

1) 3 1/2 digits LCD with a Max. Reading of 1999 2) Diode and Buzzer function 3) Low battery indication 4) Overload protection 5) Data hold for easy reading * Specification: 1) DC voltage: 600V (±1.0%) 2) AC voltage: 450V ( ±1.2% ) 3) OHM: 200KΩ (±1.0%) 4) ACA: 20-400A (±2.0%) 5) Power supply: (AAA) 1.5V×2 6) Max display: 1999 7) Buzzer: YES 8) Diode test: YES 9) Data hold: YES 10) Dimension 150L×63W×27.5Hmm 11) Weight 121g

Read more less

1) 3 1/2 digits LCD with a Max. Reading of 1999 2) Diode and Buzzer function 3) Low battery indication 4) Overload protection 5) Data hold for easy reading * Specification: 1) DC voltage: 600V 　±1.0% 2) AC voltage:　450V 　±1.2% 3) OHM: 2000-2MΩ 　±1.0% 4) ACA: 20-200 -400A 　±2.0% 5) Power supply: (AAA) 1.5V×2 6) Max display: 1999 7) Data hold: YES 8) Weight: 160g 9) Dimension:160L×55W×22Hmm

Read more less

1. Use PVC wire, anti-breaking soft rubber handle, strong flexibility and not easy to break. 2. The effective probe is up to 21mm, and the front is gold-plated design, which makes the sensitivity of the test lead high in the test, and the quality is good and durable. 3. Large voltage 1000V, current 20A, can be directly plugged into the power meter for use 4. The tip of the meter pen is very sharp and fine, about 0.26MM, suitable for measuring very small IC pins, LED lights and small components. 5. The length of the test pen stick is about 15.5cm, and the effective probe is about 2cm 6. The total length is about: 110cm 7. Wire core: 42 core 8. Resistance to high and low temperature conditions: 0-40 degrees Celsius 9. Scope of application: Standard instrument with standard 4mm banana plug

Read more less

1. Description: It is used to measure the opening phase condition and order through LED and Buzzer. 2. Measuring frequency range:20Hz~400Hz 3. Operational Voltage:60V-600V (3 Phase AC) 4. Limit Support Voltage: 2000V/minute (impulse voltage 4000V) 5. Limit Time for continuous use: - 60 minutes maximum at 200V AC - 4 minutes maximum at 600V AC 6. Test Leads: Double insulation, with 67cm length (Approx.) 7. One unit with 2 functions: The instrument was designed to check the phase sequence, and at the same time it has LEDs to show you if the phase is open or not. 8. Alligator Clips: They can easily involve the terminals of the control panel to be tested, guaranteeing reliability and safety. 9. Highly reliable: It can check a large range of 60V to 600V AC three-phase. The instrument guarantee high reliance and performance. 10. Functional Design: Small, light and portable. It was designed to facilitate the operation to the maximum. 11. Dimensions: 85x64x23mm(Approx.)

Read more less