New Arrivals

56 products


  • TTGO T8 V1.7 WiFi Bluetooth Module ESP32 WROVER 4MB FLASH 8MB PSRAM Module-garmade.com

    TTGO T8 V1.7 WiFi Bluetooth Module ESP32 WROVER 4MB FLASH 8MB PSRAM Module

    1. Espressif official ESP32-WROVER module 2. New ESP32 version: REV1 3. Wireless Internet 4. Bluetooth 5. 4MB flash memory 6. 8MB PSRAM 7. Lithium battery interface, 500mA maximum charging current 8. Support TF memory card 9. With 3D wires

    €23,25

  • TTGO T-Beam ESP32 Bluetooth WiFi Module 433MHz GPS NEO-M8N LORA 32 Module with Antenna & 18650 Battery Holder-garmade.com

    TTGO T-Beam ESP32 Bluetooth WiFi Module 433MHz GPS NEO-M8N LORA 32 Module with Antenna & 18650 Battery Holder

    1. New version of ESP32: REV1 2. Wi-Fi/Bluetooth/4MB flash memory/4MB PSRAM/3D antenna/LORA Product description 1. Working voltage: 1.8~3.7v 2. Acceptable current: 10~14mA 3. Emission current: -120mA at +20dBm -90 mA at +17dBm -29mA at +13dBm 4. Working frequency: 433HMz version SX1278 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm at LoRa and 62.5Khz & SF = 12 and 146bps - 136dBm at LoRa and 125Khz&SF = 12 & 293bps - 118dBm at LoRa & 125Khz & SF = 6& 9380bps - 123dBm at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: - 1.2K~300Kbps at FSK - 0.018K~37.5Kbps in LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA in SLEEP - 1.5uA in IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. RF wake-up function 18. Low pressure detection and temperature sensor 19. Fast wake-up and frequency hopping 20. Highly configurable packet handler Global Positioning System 1. GPS module NEO-M8N, 3V-5V power supply universal 2. Designated module with ceramic antenna, super strong signal 3. Save configuration parameter data EEPROM Down 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 Power 1. TP5400 2. 2A battery management 3. LED indicator: There are 4 LEDs to display the battery status in real time. 4. Power button: Click once to start. Tap twice quickly to close. 5. USB 6. CP2104-GMR 7. Pre-flash firmware: SoftRF V4.0 Packing list: 1. TTGO T-Beam ESP32 2. 433MHz antenna 3. Pin x 1 4. Screw Washer x 3 Note: OLED is not included in the invoice

    €87,03

  • TTGO T-Beam ESP32 Bluetooth WiFi Module 868MHz GPS NEO-M8N LORA 32 Module with Antenna & 18650 Battery Holder-garmade.com

    TTGO T-Beam ESP32 Bluetooth WiFi Module 868MHz GPS NEO-M8N LORA 32 Module with Antenna & 18650 Battery Holder

    1. New version of ESP32: REV1 2. Wi-Fi/Bluetooth/4MB flash memory/4MB PSRAM/3D antenna/LORA Product description 1. Working voltage: 1.8~3.7v 2. Acceptable current: 10~14mA 3. Emission current: -120mA at +20dBm -90 mA at +17dBm -29mA at +13dBm 4. Working frequency: 868MHz version SX1276 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm at LoRa and 62.5Khz & SF = 12 and 146bps - 136dBm at LoRa and 125Khz&SF = 12 & 293bps - 118dBm at LoRa & 125Khz & SF = 6& 9380bps - 123dBm at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: - 1.2K~300Kbps at FSK - 0.018K~37.5Kbps in LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA in SLEEP - 1.5uA in IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. RF wake-up function 18. Low pressure detection and temperature sensor 19. Fast wake-up and frequency hopping 20. Highly configurable packet handler Global Positioning System 1. GPS module NEO-M8N, 3V-5V power supply universal 2. Designated module with ceramic antenna, super strong signal 3. Save configuration parameter data EEPROM Down 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 Power 1. TP5400 2. 2A battery management 3. LED indicator: There are 4 LEDs to display the battery status in real time. 4. Power button: Click once to start. Tap twice quickly to close. 5. USB 6. CP2104-GMR 7. Pre-flash firmware: SoftRF V4.0 Packing list: 1. TTGO T-Beam ESP32 2. 433MHz antenna 3. Pin x 1 4. Screw Washer x 3 Note: OLED is not included in the invoice

    €101,18

  • TTGO T-Internet-POE ESP3 Module Downloader Extension Board-garmade.com

    TTGO T-Internet-POE ESP3 Module Downloader Extension Board

    Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-WROOM, LAN8720A Ethernet chip, SI 3404 power management chip 2. Flash: 4MB 3. PSRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: robot, rest 6. External device: TF card slot, C-type interface, PA2369NL 1825-S transformer, HR861153C Ethernet-POE interface 7. USB to TTL: CP 2104 8. Modular interface: SD card, UART, SPI, I2C, PWM, I2S, ADC 9. Satellite clock: 32.768 MHz crystal oscillator 10. Operating temperature range: -40 degrees Celsius to +85 degrees Celsius 11. Size: 70x52.3x17mm 12. Weight: 26.85g Power Specifications 1. Power input: -C type USB 5V 2. HR861153C Ethernet-POE interface: 50V 3. Working voltage: 2.7V-3.6V 4. Output current: about 1.2A 5. Charging current: 500 mA 6. USB: Type C USB Wi-Fi 1. Standard: FCC/CE-Red/IC/TELEC/KCC/SRRC/NCC (ESP 32 chip) 2. Protocol: 802.11 b/g/n (802.11n, acceleration 150 Mbps) A-MPDU and A-MSDU aggregation, support 0.4??S guard interval 3. Frequency range: 2.4GHz~2.5GHz (2400 m~2483.5M) 4. Transmit power: 22 dBm 5. Communication distance: 300 meters Bluetooth 1. Protocol: Complies with Bluetooth V4.2BR/EDR and BLE standards 2. Radio frequency: -97 dBm sensitivity nzif receiver class-1 class-2 class-3 emitter AFH 3. Audio: CVSD&SBC audio Software Specification 1. Wi-Fi mode: workstation/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA 2/WPA 2-Enterprise/WPS 3. Encryption type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development/sdk for user firmware development 6. Network protocol: IPv 4, IPv 6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. User configuration: +instruction set, cloud server, Android/iOSapp 8. OS: FreeRTOS

    €8,10

  • TTGO T-Internet-POE ESP3 Module Ethernet Adapters Extension Board-garmade.com

    TTGO T-Internet-POE ESP3 Module Ethernet Adapters Extension Board

    Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-WROOM, LAN8720A Ethernet chip, SI 3404 power management chip 2. Flash: 4MB 3. PSRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: robot, rest 6. External device: TF card slot, C-type interface, PA2369NL 1825-S transformer, HR861153C Ethernet-POE interface 7. USB to TTL: CP 2104 8. Modular interface: SD card, UART, SPI, I2C, PWM, I2S, ADC 9. Satellite clock: 32.768 MHz crystal oscillator 10. Operating temperature range: -40 degrees Celsius to +85 degrees Celsius 11. Size: 70x52.3x17mm 12. Weight: 26.85g Power Specifications 1. Power input: -C type USB 5V 2. HR861153C Ethernet-POE interface: 50V 3. Working voltage: 2.7V-3.6V 4. Output current: about 1.2A 5. Charging current: 500 mA 6. USB: Type C USB Wi-Fi 1. Standard: FCC/CE-Red/IC/TELEC/KCC/SRRC/NCC (ESP 32 chip) 2. Protocol: 802.11 b/g/n (802.11n, acceleration 150 Mbps) A-MPDU and A-MSDU aggregation, support 0.4??S guard interval 3. Frequency range: 2.4GHz~2.5GHz (2400 m~2483.5M) 4. Transmit power: 22 dBm 5. Communication distance: 300 meters Bluetooth 1. Protocol: Complies with Bluetooth V4.2BR/EDR and BLE standards 2. Radio frequency: -97 dBm sensitivity nzif receiver class-1 class-2 class-3 emitter AFH 3. Audio: CVSD&SBC audio Software Specification 1. Wi-Fi mode: workstation/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA 2/WPA 2-Enterprise/WPS 3. Encryption type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development/sdk for user firmware development 6. Network protocol: IPv 4, IPv 6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. User configuration: +instruction set, cloud server, Android/iOSapp 8. OS: FreeRTOS

    €51,30

  • GL09 PLUS Low Standby Power Consumption 8-channel Monitoring GSM Alarm Module-garmade.com

    GL09 PLUS Low Standby Power Consumption 8-channel Monitoring GSM Alarm Module

    1. Low-power sleep mode design 2. One way alarm voltage output 3. It can detect the voltage of the battery in real time and make a low battery voltage alarm, suitable for battery-powered applications, and a wide voltage supply range from DC5V to DC16V 4. Eight-way alarm detection, users can set different content for each alarm SMS, The input port can be selected as NC or NO alarm mode 5. 6 groups of called numbers can be set. When the alarm input has a trigger signal, an alarm message will be sent to the alarm number, or an alarm will be called directly 6. Easy to use, supports iOS and Android apps, you can simply send text messages through the app to set up 7. Wide application fields: mainly home security, warehouses, remote unattended stations, remote monitoring of equipment parameters (such as oil pressure, air pressure, water pressure, voltage, etc.), product upgrades (voltage monitoring, overload monitoring, etc.), safety protection (Smoke, fire, water level monitoring, gas, etc.) Other unattended points 8. Size: 8 x 5.8 x 2.2cm

    €97,15

  • GA01P Mini Smart Power-off GSM SMS Phone Alarm Module-garmade.com

    GA01P Mini Smart Power-off GSM SMS Phone Alarm Module

    1. The input is a switch signal. When the input port is short-circuited to the ground (GND), an alarm message will be sent to the preset alarm phone, or call the set alarm number. The content of the alarm message can be set by yourself 2. It is simple and convenient to use, can be well embedded in other equipment, and act as a remote alarm working system 3. The alarm content of 1 alarm input and the alarm content when it is restored to normal can be defined by yourself 4. Built-in rechargeable lithium battery, usually in a charging state, when the main power is off, it will provide power and send an alarm message to the preset number 5. Power supply: DC 5V-15V

    €49,88

  • S-DIY-0279.jpg@446154ca43447fce18293e043a90dd26

    12V to 5V DC-DC 15w Step Down Power Converter Module

    1. Voltage: DC8-20V 2. Output:5V3A 3. Power:15W 4. Convert efficiency: up to 96% 5. Working temperature:-40C-80C 6. With Over-current, over-temperature and short circuit Protection

    €16,53

Introducing the ultimate solution to the less glamorous side of pet ownership: the Dog Poop Picker from Garmade. This ingenious device is here to revolutionize the way you clean up after your furry friend, making it a breeze to maintain a tidy and hygienic environment.

The Dog Poop Picker is a game-changer for dog owners who have experienced the not-so-pleasant task of picking up after their canine companions. With its ergonomic design and innovative features, this handy tool takes the hassle out of poop patrol. Equipped with a sturdy and extendable handle, the Dog Poop Picker ensures that you never have to bend down or come into direct contact with any unwanted mess. Simply extend the handle to your desired length, position the picker over the target, and with a quick squeeze, the poop is securely collected.

But that's not all - the Dog Poop Picker is more than just a functional tool. It's a statement of style and convenience. With its sleek design and vibrant color options, it adds a touch of flair to your daily doggie duties. Cleaning up after your furry friend has never been so fashionable! Say goodbye to those awkward moments of fumbling with plastic bags or struggling to scoop up the mess. Embrace the modern pet owner's secret weapon and make dog poop pickup a seamless and sanitary experience. Don't let the dirty work hold you back from enjoying the joys of pet ownership - let the Dog Poop Picker from Garmade be your trusty sidekick in keeping your surroundings clean and pristine.

Login

Forgot your password?

Don't have an account yet?
Create account