New Arrivals

1. Purpose: Measure tilt angle2. Resolution: 0.1 degree3. Measuring range: 4x90 degrees4. Power supply: 1 AAA battery (not included)5. Size: About 5.7x3 cm6. Weight: About 70 gramsFeatures:1. 4 kinds of units can be switched, angle, slope, in/ft, mm/m2. Powerful adsorption magnet design, 360-degree comprehensive measurement, inclination/level test function3. The screen automatically flips. When the instrument is placed upside down, the display screen will automatically flip and display, 360 measurement, convenient for viewing data Strong backlight4. Convenient to view data, automatic shutdown after 1 minute of non-use, energy saving and power saving5. It can be locked at any angle, and the HOLD key can hold measurement data at any angle

Read more less

1. Measuring range:0-1999 PPm(mg/L) 2. Resolution: 1 PPm(mg/L) 3. Accuracy: +/-2%F.S 4. Operating Temperature: 0 degree - 50 degree C(32degree F-122 degree F) 5. Pocket sized and feather-weight for portable use in a large number of applications including Production and drinking of pure water, Cleanness of swimming pool water, Food processing, Hospitals products, Aquatic cultivation, Boiler water, Households and offices, Aquarium water, Teaching of physics and chemistry, Electroplating water, Cooling towers, Laboratories, Ionized water and water quality testing etc. 6. Size: 150x27x20mm 7. With TDS calibration solution (1382ppm 25 degree)

Read more less

1.This is a digital TDS meter tester to test the filter water quality purity, to check the performance of your water filter, to check for hardness to make sure you always drink pure water.Saves measurements for convenient reading and recording New Arrival 2.Auto-off function: turns off meter after 5 minutes of non-use to conserve batteries 3.Automatic temperature compensation 4.Shift between TDS and conductivity 5.Can be used in : Water purifiers and filters, food(vegetable, fruit)& drink quality monitoring, pools and spas, aquarium, hydroponics

Read more less

1. Wide range of detectable requency 2. Can detect the electromagnetic radiation everywhere 4. Easy operation,can detect the power of electromagnetic radiation around home electronics,electricty wire,industrial equipment and so on 5. For detecting environmental electromagnetic radiation: indoors,office,computer station room industrial control room,electricity wire,high voltage wire,monitor and so on which are the origin of radiation 6. For detecting hom electronics: cellphone,PC,TV Set copy machine,fax machine,AC,refregrator and so on 7. Requency range: 50Hz-2000MHz 8. Reacting time: 0.4S 9. Voltage: 9V 10. Battery: 1x6F22/9V(included) 11. Size: 133x70x30mm

Read more less

1. Brix Refractometer,are developed for working with sugar related liquids (fruit juices, soft drinks,wine), help monitor and control sugar concentrations in foods and beverages. 2. Whether users are checking the Ripeness of fruit in the field, verifying product quality after harvesting, or controlling concentrations during processing and packaging, refractometers provide critical information to ensure product quality. But,it is also commonly used for controlling the concentration of various industrial fluids cutting lubricants and flux rinsing compounds). Full ranges of measurement is available. 3. Check the ripeness of fruit whilst its growing - Verify the quality after picking or harvesting - Control the concentrates during processing 4. Measuring Range : Brix 0-32% 5. Minimum Divisions : Brix 0.2% 6. Automatic Temperature Compensation (ATC) 7. Size: 170x40x40mm

Read more less

1. This product adopts piezoelectric effect of artificial polarized ceramic for design. It is suitable for monitoring all kinds of vibrating mechanical facilities, especially the vibration measurement of rotating and reciprocating machinery. The unit can measure acceleration, velocity and displacement, which is widely used in mechanical manufacture, electric power metallurgy and general aviation. 2. Simple to use, the structure is compact, portable for carrying along with measurement. 3. Visually display measurement value and state. 4. Different vibration frequency selection. 5. High sensitivity probe for accurate measurement Provides long and short probe head, each one is suitable for different situation measurements. 6. Equipped with AC signal output interface. 7. Low power indication. 8. Auto power-off. 9. LCD backlight. 10. Measuring frequency range of acceleration: 10Hz~1KHz (LO); 1KHz~15KHz (HI). 11. Measuring frequency range of Velocity: 10Hz~1KHz (LO) 12. Measuring frequency range of Displacement: 10Hz~1KHz (LO)

Read more less

1. Material: ABS housing 2. Features: Testing gauss, keep you away from radiation , good for your health 3. Special Functions: 5-LED indicators, each represent different value of radiation; Easy to use; Powered by 1 x 9V (included) 4. Application Monitoring: 50/ 60Hz frequency 5. Other: Dark green 0 to 1.5 milliGauss; Light green 1.5 to 2.5 milliGauss; Yellow 2.5 to 10 milliGauss; Orange 10 to 20 milliGauss; Red 20+ milliGauss 6. Size: 14.3 x 5.3 x 2.9cm

Read more less

1. Description: - Cost-effective 8 channels oscilloscope for vehicle testing; 2.4MSa/s, 12bits; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc. - Vehicle Testing - First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition - Ignition: primary and secondary - Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position - Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus - Performer: Petrol/Diesel - Starter and charging circuits 2. Oscilloscope: - 8 channels oscilloscope, 2.4MSa/s real time sampling rate - 12 bits vertical resolution, spectrum analysis function Programmable Generator - 8 channels programmable generator - Can analog signals of crankshaft, camshaft etc 3. Others: - USB 2.0 interface plug and play, and no need extra power supply - More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use

Read more less

1. Time Setting Range: 0-99,999.99 Hours 2. Voltage: AC 220-240V, 50Hz 3. Suitable for houses, industrial usages and air conditioners 4. Size: 70 x 70 x 37mm 5. Weight: 56g

Read more less

1. Powerful spring pulling the mini hooks to grasp tiny components firmly and avoid any short-circuit. 2. You can connect the clips to multimeter or DC power by a lead. 3. Help you to test IC or repair cell phone and other mini electronics much more conveniently 4. Copper with gold plated material ensures the accuracy while testing. 5. Test hook probe with solder port fits various connection for equipment like a digital multimeter 6. Material: ABS 7. Length: 40mm

Read more less

1. Brand new and high quality 2. Material: ABS 3. Length: 56mm

Read more less

1. Model: GM510 2. With11unitsto select:bar,mbar,kPa,kgf/cm2,mmHg,cmH2O,Ozf/in2,psi,inHg,inH2O,ftH2O. 3. USB dara hold. 4. USB interface 5. Low battery indicator function 6. Auto power off. 7. A computer through a USB adapter,can be used to record special software for data analysis

Read more less

Features1. Date / month / year / clock with temperature humidity display 2. Button to switch temperature display unit. 3.Check and clean the memory: Press the (MEMORY) memory button can check the maximum(MAX) / minimum(MIN) / temperature and humidity value in the memory. When showed Maximum(MAX) / minimum(MIN) temperature and humidity value in display, long press the (MEMORY)memory button to clean the Maximum(MAX) / minimum(MIN) temperature and humidity value in the memory. 4.The date and clock setting : When display the clock long press the (MODE) button start to set the clock, followed by minutes hours 12/24 hours year mouth day, press the (ADJ)key to adjust, then press the (MODE) button to confirm the clock and date. 5.The alarm time setting: When display the clock,short press (MODE) button to switch to the alarm display, and then long press the (MODE) button start to set the alarm time followed by minutes hours, press the (ADJ) button to adjust. Then press the (MODE) button again to confirm the alarm time setting mode. 6.The alarm clock and the whole point time keeping opening and closing when display the clock, should press (MODE) button to switch to the alarm display,and then press the (ADJ) button to open and close alarm clock or the whole point timekeeping,followed by the alarm clock opened the whole point time keeping opened both the alarm clock and the whole point time keeping opened both the alarm clock and the whole point time keeping closed. 7. This product use 1.5V A A A *2 (Not included) 8. The font is displayed fuzzy please replace the battery 9. The six functions:luminous memory The temperature The clock humidity The alarm clock

Read more less

About the product1. EC conductivity meter for test the quality of water. 2. The measuring water probe of conductivity test pen is made of titanium alloy materials. 3. Appearance dexterous, beautiful, small size, measuring high precision. 4. Large-screen digital display. 5. Easy to clean, and easy to carry. 6. Quick measurement, 5-30 seconds can finish one measurement. 7. With Automatic Temperature Compensation 8. EC conductivity meter has a wide range of applications including aquarium, hydroponics, water systems, aquaculture, pools and spas, labs & scientific testing, boilers & cooling towers, home, office, physical & chemical teaching, cosmetics and so on.The Test Pen Using1. Remove the protective cover. 2. Press the ON / OFF switch, connect power supply. 3. Put the US conductivity insert test pen into the test liquid until the liquid immerses slightly below the position of the immersion line. 4. Gently shaking, eliminate the bubbles of electrode. 5. Read the data after the indication stable (about 10 seconds). Press the HOLD key, the number locked. You can take the US conductivity test pen out the surface of liquid to read. Press again the HOLD key, then it can be unlocked. 6. After using, turn off the power, clean the electrode with water, then put on protective sleeve.

Read more less

About the product1. The electrical compensation function provide the compensation to the thermocouple error so as to improve the overall precision 2. To measure the thermocouple of J, K,T,E,N and R type. 3. Unit Celsius and fahrenheit unit 4. Human centered design, easy operation 5. Measuring Range: J-type: -210C to 1200C (-346F to 2192F) K-type: -200C to 1372C (-328F to 2501F) T-type: -250C to 400C (-418F to 752F) E-type: -150C to 1000C (-238F to 1832F) N-type: -200C to 1300C (-328F to 2372F) R-type: 0C to 1767C (32F to 3212F) 6. Resolution: 0.1C/F<1000Degree; 1.0C/=<1000Degree 7. Electrical compensation 8. C/F Switch

Read more less

Pure carbon monoxide (CO) is colorless, odorless, and non-irritant gas: molecular weight: 28. 01; Density: 1. 250g/ l; freezing point: - 207C; boiling point: - 190C. Its solubility in water is quite low, but it dissolves instantly in ammonia water. Air mixed explosion limit is between 12. 5% and 74%. After entering human body, carbon monoxide will combine with hemoglobin in blood, making the hemoglobin not able to combine with oxygen, which causes oxygen deficit to organism organization, leading to death from suffocation. Therefore, carbon monoxide is toxic, and is colorless, odorless, and tasteless, which is easy to be ignored and thus causing poisoning. The carbon monoxide detector can detect the concentration of carbon monoxide gas, and observe the value of carbon monoxide gas concentration at any time. It has a very clear large LCD screen, sound and light alarm prompts, to ensure that dangerous gases can be detected under very unfavorable working environments and prompt operators to prevent them in time. It is widely used in petroleum, chemical, coal, metallurgy, papermaking, fire fighting, municipal administration, telecommunications, food, textile and other industries. 1. Gas Tested: CO in the air 2. Measuring Range: 0-1000ppm 3. Resolution: 1ppm 4. Minimum Reading: 1ppm 5. Basic Error: +/-5%(f.s), +/-10ppm 6. Response Time: 60 seconds 7. Sensor Type: Electrochemical CO sensor

Read more less

1. Monitor the current value of the active power 2. Monitor the current voltage /current / frequency 3. Record the total time consumption 4. Record the total electricity consumption 5. Calculate CO2 emissions 6. Power factor detection 7. Set the alarm threshold load 8. Large LCD display

Read more less

About the productOut of clusters of humidity and temperature instruments, this low power consumption Data-Logger combines the functions of signal-sampling, display, storage and analysis, widely be applied in the industries of medicine, food processing, agricultural research, laboratory, electronics, air-conditioning, weather service, archives management, archaeology study, fiber manufacturing and cold chain logistics, because this device can provide just-in-time solution of environment-monitoring, alerting and recording.Features1. In measurement - With high sensitivity detector to pick up temperature and humidity with quick response and high precision. - This device can review the readings of the current, max, min, up limit and low limit data 2. In memory - Automatically record and store the data of temperature and humidity. 3. Data transfer - Directly connect the device with PC USB interface to transfer data with PC. 4. In programming - To set up sampling period, storage interval and alarming. 5. In analyzing - With specialized software to analyze the data of temperature and humidity with easy and reliable operation 6. In safety - The bracket allows screw fastening with transparent water dust proof cover to protect the device from moisture 7. In convenience - Both temperature and humidity can be displayed with battery volume alert, this device is compact and portable to be placed and worked like a flash disk

Read more less

About the product1. The carbon dioxide tester applies to the continuous online detection and site sound-light alarm of carbon dioxide concentration in various industrial environment and special environment, which functions as early warning for operation safety on the dangerous site. 2. Using the imported electrochemical sensor and microcontroller technologies, the instrument is featured by stable signal, high precision and good repeatability and other merits, and its explosion-proof connection mode applies to various dangerous sites. 3. It can provide 24 hours continuous real-time monitoring of indoor carbon dioxide concentration, display date, detection time, temperature and humidity data on the detection site automatically. 4. This instrument is compatible with various control alarms, PLC, DCS and other control systems, which can realize site alarm, remote monitoring and alarm function at the same time.Functions1. Sound-light alarm setting 2. Low battery indication 3. LCD backlight display 4. Temperature unit switch 5. Data and time setting 6. Support carbon dioxide gas detection 7. Maximum value, minimum value and data hold 8. Data display format: YMD or MDY switch

Read more less

About the product1. Radiation survey meter can test electric field radiation and magnetic field emission to reach the optimal test result. 2. It is used to test and learn electromagnetic radiation situation indoor and outdoor. 3. It is equipped with a built-in electromagnetic radiation sensor, which can display the radiation value on LCD digital display after processing by the control micro-chip. 4. You can make reasonable processing or taking effective prevention measures toward the electromagnetic radiation according to the test resultFeatures1. One instrument with two uses, it can test the electric field and the magnetic field radiation at the same time 2. Sound-light alarm, when the test result exceeds the safe value, the instrument will alarm automatically 3. Data locking, one-key lock of the radiation value 4. LCD graphic display of the radiation value trend 5. Radiation assessment, remind you whether the radiation value is safe or not 6. Fashionable design, easy on-hand operation, it is easy to move or make field measurementRange of Application1. Electromagnetic radiation monitoring: House and apartment, office, outdoor and industrial site 2. Electromagnetic radiation test: Mobile phone, computer, TV set, refrigerator and high voltage cable radiation test 3. Radiation protection product test: Test effects of radiation-proof clothes, radiation-proof film and other prevention articles

Read more less

About the product1. This is a professional network cable detection equipment, designed for wires tracking. 2. Can help you to find the cable from a plenty of wire cable quickly and efficiently. 3. It is a necessity instrument in the routine maintenance of network cables, communication cables, metal line construction projects 4. The transmitter is powered by 1.5V 3 x AAA batteries (not included) 5. The receiver is powered by 6F22 9V battery (included)Functions1. Long distance wiring tracing 2. Internet cable order verifying 3. Wiring voltage existence inspection 4. Wiring voltage positive or negative characteristic measuring. 5. Wiring shorts inspection 6. Low battery indication 7. Tracing sensitiveness and volume adjusting 8. Headphone jack output 9. FlashlightPackage Contents- 1 x Transmitter - 1 x Receiver - 1 x RJ11 Crystal Head Wiring - 1 x RJ45 Crystal Head Wiring - 1 x Alligator Clip Wiring - 1 x English User Manual - 1 x 6F22 9V Battery

Read more less

About the product1. This product adopts piezoelectric effect of artificial polarized ceramic for design. 2. It is suitable for monitoring of all kinds of vibrating mechanical facility, specially the vibration measurement of rotating and reciprocating machinery. 3. The unit can measure acceleration, velocity and displacement, which is widely used in mechanical manufacture, electric power metallurgy and general aviation etc. field.Features1. LCD displays measurement result and conditions directly 2. Measure acceleration, velocity and displacement 3. Selective vibration characteristic 4. Use hi-sense of vibration sensor, measuring accurately 5. Equipped two probes (S and L) to adapt the different measurement requirement 6. Provide a magnetic probe to fit the condition uneasy hold on by hand 7. Low battery indication 8. Auto turn off function 9. LCD back light function 10. Maximum value hold function 11. Temperature unit Celsius Degree / Fahrenheit Degree selection

Read more less

Features1. Auto discharge function to make the operation safe 2. LCD backlight 3. Digital readout display 4. Live circuit warning symbols with audio sounds 5. Anto power off function (in 10 minutes without operation) 6. Timer measurement function 7. Low battery indication 8. Suitable for 12V DC adapter (12V / 1A)Specifications1. Display: Max. 999 counts LCD display (1000 counts only at 1T is displayed) Bar graph / max. 36 points. 2. Over range indication: OL mark appears on insulation resistance range. LO mark appears on voltage range 3. Auto-ranging: Range shifts to upper range: 1000 counts. Range shifts to lower range: 95 counts (merely on the insulation resistance range) 4. Sample rate: 0.5-10 times / sec 5. Operable altitude: Less than 2000m (Indoor use) 6. Operation circumstance: Temperature 0-40 Celsius Degree, humidity: <=85% 7. Storage circumstance: Temperature -20-60 Celsius Degree, humidity: <=90% 8. Overload protection: Insulation resistance: AC 1200V / 10s, Voltage: AC 720V / 10s 9. Voltage resistance: AC8320 (50/60Hz)/5 seconds (between electrical circuit and enclosure) 10. Insulation resistance: 1000M of more / DC 1000V (between electrical circuit and enclosure) 11. Power Supply: DC 12V (8 x 1.5V LR14 batteries) (included) 12. Size: 153mm x 96mm x 220mm 13. Weight: 1032g (without batteries and test wires)

Read more less

About the product1. Built-in microcomputer chip for energy metering, along with current sensor and LCD display 2. Can be used to measure air conditioners, refrigerators, microwave and other household appliances 3. Suitable for families, rental housing, office, laboratory and etcFeatures1. Standard: BC17215-2003 2. Power applied: 220V 50Hz Max 16A (Less than 3520W) 3. Precision: 1.0 4. Constant: 6400imp/kWh 5. Power consumed: less than 1W 6. Operating temperature: 0 - 45 celsius degree 7. Storage temperature: -20 - 60 celsius degree 8. Monitor present active power/voltage/current/frequency 9. Record powering time and power consumed 10. Calculate CO2 emission 11. Backlight and Large LCD display

Read more less

1. Ergonomically designed to fit wearing in finger 2. Portable, compact design, Light weight, easy for carry 3. With luminous function, clear to see, lower consumption Specifications: 1. Brand Name: RV77 2. DIY Supplies: Electrical 3. Type:5-digit Counters 4. Material: Plastic 5. Color: Random 6. Size: 3.8x3x1.8cm 7. Weight: 17g Package Included: 1 x Counter

Read more less

1. Name: Dial indicator 2. Precise and professional made, stable performance 3. Range: 0-10mm 4. Resolution: 0.01mm 5. Display: Pointer 6. Color: Silver 7. Dimension: 5.5*2.2*4cm (Diameter*thickness*bottom length) 8. Function: Metering the concentricity of principal axis

Read more less

Display Type:Digital With Backlight Or Not:No DIY Supplies:Electrical Product Description A TDS meter (aka ppm pen, nutrient tester, tds stick) is an inexpensive and convenient digital tool to instantly check your overall water quality. TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. With the push of a button, the TDS can tell you your overall water purity level,which will be displayed on the screen in ppm (parts per million). The lower the TDS level, the purer the water, with 0 ppm being pure H2O. The TDS is great for checking your tap water quality, or knowing when to change a filter. (The meter does not test for biological contaminants.) The TDS is a great tool for drinking water,water filtration and purification, colloidal silver, hydroponics (test your nutrients), aquariums, RO/DI systems, pools and spas, commercial and industrial applications and more. The TDS is a rugged model that includes a protective carrying case. This is the worlds most popular handheld TDS meter for industry professionals. ts Ideal for Commercial Use Its Includes a Carrying Case with Belt Clip Hold Function: Saves Measurements for Convenient Reading and Recording Highly Efficient and Accurate Due to Its Advanced Microprocessor Technology Built-in Digital Thermometer, Display: Large and Easy-to-read LCD Screen. The AquaLutio Digital TDS Water Meter is ideal for testing applications such as hydroponics and gardening, pools and spas, aquariums and reef tanks, water ionizers, Water Filter. drinking water and more. TDS Water Meter is ideal for testing applications ideal drinking water, Water Filter, carbon filters, spring water, hard water, average tap water, Refrigerator Water Filter, Water Filter, brita filter, Reverse osmosis, reverse osmosis filter.Features 1. The AquaLutio digital TDS water meter is ideal for testing applications such as hydroponics and gardening, pools and spas, aquariums and reef tanks, water ionizers, water filter. drinking water and more.2. Measurement Range: 0-9990 ppm , 1 ppm Resolution, +/- 2% readout accuracy.3. Temperature Button: Test water temperature, 31 - 200 F degrees, 1 F degree resolution.+/- 2% Readout Accuracy.4. Function: Saves measurements for convenient reading and recording.5. Auto-off function: Turns off meter after 10 minutes of non-use to conserve batteries.6. The smallest and lightest TDS meter available on the market. Highly efficient and accurate due to Its advanced microprocessor technology. 7. Power source: 2 x 1.5 V(LR44 Button Cell)

Read more less

DIY Supplies:Electrical Model Number:CO Gas Analyzer The Carbon monoxide gas detector is a portable detector for detecting carbon monoxide (CO) gas. It can continuously monitor the CO gas concentration in the surrounding environment, once the gas concentration reaches the level of the alarm, the alarm will sound, light and vibration.High precision portable CO gas tester with compact size and light weight is easy to carry and operate. It is widely used in petroleum, chemical, coal, metallurgy, paper, fire, municipal, telecommunications, food, textile and other industries.Features:1. Portable detector for detecting carbon monoxide(CO) gas.2. Can continuously monitor the CO gas concentration in the surrounding environment.3. Sound alarm works when CO gas concentration reaches the level of the alarm.4. Compact size, light weight, easy to carry and operate.5. Professional and accurate measurement.6. Large LCD display and degree C / degree F switch.7. Can set concentration of alarm value.9. Auto power off in 10 minutes without any operation.Specifications:1. Brand Name: SMART SENSOR 2. Color: Orange + Black3. Material: ABS Plastic4. Sensor Type: Stablized Electrochemical Gas Specific (CO)5. Detection Gas: Carbon Monoxide (CO)6. Temperature Measurement: Ambient Temperature 7. Display Unit: CO: ppm, Temperature: Degree C / degree F 8. Measurement Range: CO: 0~1000PPM, Temperature: 0~50 degree C / 32~122 degree F 9. Resolution: CO: 1PPM, Temperature: 0.1 degree C / 0.1 degree F 10. Accuracy: CO: +/-5% or +/-10PPM, Temperature: +/-1.5 degree C11. Response Time: <60s 12. Alarm: Sound Alarm 13. Alarm Point: 24PPM Preset (Adjustable) 14. Battery Type: 3 * AAA 1.5V Alkaline Batteries (NOT Included)15. Operating Temperature: 0~50 degree C, Relative Humidity 1%~99%16. Storage Temperature: -30~60 degree C, Relative Humidity: 1%~99%

Read more less

DIY Supplies:Plumbing Model Number:Gas Analyzers Install, and it could detect gas, liquefied petroleum gas, coal gas, methane, other combustible gases etc. It also has a clear LCD display for showing the numerical number of gas concentration, and it will give a loud sound when it detects a gas leakage, practical to use.Features:1. The shell of our gas detector is made of high-quality plastic material, which makes it eco-friendly, sturdy and durable to use.2. When the gas leakage occurs, the gas concentration reaches the alarm concentration will sound and light alarm, play a timely reminder, to ensure personal safety.3. With a clear LCD display, the numerical number of gas concentration will show on it clearly. When the detector detects a gas leakage, it will give an alarm in a loud sound.4. Our gas detector is highly sensitive, it could detect many kinds of gas, such as liquefied petroleum gas, coal gas, methane, other combustible gases etc.5. Easy to install with included screws and installed panel, it is also very easy to use with the power button, plug and play.6. A great household necessity to protect your families safety. Perfect for using in home kitchen, bathroom, bus carriage, grill house and so on.Specifications:1. Plug Standard: EU Plug2. Shell Material: Plastic3. Color: White4. Operating Voltage: AC 90V-240V 50/60Hz5. Working Current: 200mA6. Battery: 9V Ni-Mh Battery (Not included)7. Alarm Concentration: 2500PPM (+/-1500PPPM)8. Alarm Output: Sound & Flash alarm9. Alarm Language: English10. Operating Temperature: -10 degree C ~ +50 degree C11. Relative Humidity: 10%-95%12. Installation Mode: Wall mounted13. Alarm Sound: >=85db14. Size: Approx. 112*73*43mm

Read more less

DIY Supplies:Paint & Decorating Model Number:SMART SENSOR 4 in 1 Gas Detector This professional 4 in 1 gas detector is designed for detecting CO, H2S, O2 and LEL gas. It can continuously monitor the CO, H2S, O2 and LEL gas concentration in the surrounding environment, once the gas concentration reaches the level of the alarm, the alarm will sound, light and vibrate. High precision portable CO, H2S, O2 and LEL gas tester with compact size and light weight, very easy to carry and operate. Features:1. Detect 4 kinds of gas: carbon monoxide(CO), hydrogen sulfide(H2S), oxygen(O2) and combustible gas(LEL).2. Continuously monitor the CO, H2S, O2 and LEL gas concentration in the surrounding environment with professional and accurate measurement.3. Sound & light vibration alarm works when one of the CO, H2S, O2 & LEL gas concentration reaches the level of the alarm.4. Can set automatic shutdown time and concentration of alarm value.5. Large color LCD display with back-light for easy reading.6. Can connect to a sampling pump to operate in closed place.7. Can be widely used in shipping, mining, oil exploitation, chemical, gas pipeline, tunnel construction, coal, metallurgy, paper, fire, municipal, textile and other industries.8. Size: 138*70*43mm, weight: 360g

Read more less

With LCD Screen Or Not:Yes Gas Type:Alcohol Resolution ratio: :0.1 Reaction time: :1 (s) Power supply: :2 x AAA battery(Not Included) Weight: :70 g Support::Dropship Features: 1. Detection range:0.000% - 0.199% BAC / 0.000-0.995 mg/l 2. Digital display results (% BAC / mg /l) 3. Quick response and recovery. 4. Automatic power outage. 5. Orange back-light. 6. Low voltage indicator. Specifications: 1. Resolution ratio: 0.1 2. Reaction time: 1 (s) 3. Power supply: 2 x AAA battery(Not Included) 4. Weight: 70g Instructions: 1. Press the switch once, the LCD screen of the tester will turn on the lights, and it will send out a "noise". 2. The state of warm up number will jump from 10 to 0, and after the state blow 10 jumps to 0, the preheating program will be completed. 3. When the countdown is 6 seconds, the mouth is close to the breath test sensor and exhaled for 3-5 seconds to the sensor. 4. The screen can read the test results.

Read more less