Remote Controller

1. Timing Wireless Control Switch Kit for Ceiling Fan Lamp. 2. Compatible with most Ceiling Fan & Lamp. 3. Set switch lights, wind speed adjustment, timing, one key to complete. 4. Coming with remote control stand. 5. Accurate, reservation function, ignore the obstacles. 6. It is NOT applicable for ordinary table fan, floor fan and other non-decorative ceiling fan and lights. 7. When installing, please expose the receiving antenna on the receiver to ensure the desired reception.

Read more less

1. Working voltage: DC12V (1 PCS 27A12V battery) 2. Working current: 10mA/12V 3. Radiated power: 10mw/12V 4. Transmission frequency: 433MHZ 5. Transmission distance: 120-150M (empty ground, receiving device sensitivity is negative 100dbm) 6. Encoder type: fixed code. learning code. partial rolling code 7. Function: Copy remote control / test remote control / copy remote control 8. Size: 6.7*1.7*1.7cm 9. Weight: 20g 10. The remote control is widely used, mainly for some car remote control, remote control electric retractable door, lift, remote control gate block, remote control shutter door, garage door, sliding door, remote control LED light, remote fireworks igniter, remote control passenger door, Anti-theft alarm, electric door alarm, MP3 motorcycle anti-theft alarm, etc.

Read more less

1)Demonstration for Use: To combinate all the favorate keys of different home appliances remote controls to one remote, bring you an easy life. Adopts digital circulation learning technology, which makes the learning fast and accurate. Provides 1 pages (total 11 keys)for learning, with the liberty combination of function keys. Learn multiple home appliance reomtes to this remote directly. Easy to learn, to select, and simple for usage. Permanent memory retention. 2)Precautions for Use: To make sure the key made a successfully copy during the setting. If not, please recopy the function. Only for infrar remote control. Few special carrier wave infrared remote control may not be useful, or repetitious setting needed. 3)Technical Parameter: Control distance: Approximately 8 meters, depending on the home electric appliances Batteries: DC 3V 2*AAA LR03 1.5V (not included) Battery Life: Approximately 12 months. 4)Note: remote control is unable to control home appliances that emit frequency exceeding 100K Hertz. There may be home appliances with correspongding codes that cannot be controlled by the remote control. However, the probability of occurrence is low.

Read more less

1. Superior metal body provides strength and durability. 2. It has code lock function, data regeneration function, one key intelligent copy function. 3. Handy key chain size attaches to your car keys no more unwanted bulkiness. It can copy the IC model of original remote control is 2262/2260/PT2264/5326 and etc. 4. High speed and high accuracy, the code is not easy to loss. 5. Scope of application: vehicle central locking systems, garage doors, electronic gates, electrical appliances, car sunroofs and etc.

Read more less

1. Superior metal body provides strength and durability. 2. It has code lock function, data regeneration function, one key intelligent copy function. 3. Handy key chain size attaches to your car keys no more unwanted bulkiness. It can copy the IC model of original remote control is 2262/2260/PT2264/5326 and etc. 4. High speed and high accuracy, the code is not easy to loss. 5. Scope of application: garage doors, electronic gates, electrical appliances, car sunroofs and etc.

Read more less

1. Remote control distance: about 8 meters 2. Battery: AAA*2 (not included) 3. Battery life: about 12 months 4. Combine the buttons of different home appliance remote controllers into one remote controller to make your life easier 5. With permanent memory retention function 6. Easy to use

Read more less

1. Product introduction : 433MHz wireless transmitter Learning remote control Multi-frequency copy wireless remote control TX006 2. This product is a wireless remote control, electroplating decorative film, the appearance is generous and beautiful; the internal circuit design is scientific, using SMT chip components, sound table resonator frequency stabilization, high stability, low power consumption and so on. 4. Working voltage: DC12V 5. Working current: less than 12mA 6. Working frequency: 433.92MHz 7. Transmitting power: more than 10mW 8. Launch distance: 100 meters (open space) 9. Transmission rate: 50--60KHZ 10. Working chip: 2262, 2240, 1527, 301 optional 11. Working temperature: -20 - 70 Celsius 12. Storage temperature: -10 - 50 Celsius 13. Humidity: 85% or less

Read more less

1. Shell material: ABS2. Button material: soft silicone3. Remote control distance: less than 8 meters4. Batteries used: 2 AA batteries (not included)5. Sensitive control, environmentally friendly and non-toxic6. All 17 buttons can be customized for learning. Using one-to-five learning, 17×5=85 buttons can be learned.7. High-quality soft silicone buttons, full of resilience8. Translucent brown film, beautiful, infrared penetrable9. After the setting is completed, the code is permanently memorized, and there is no need to reset it even if the power is cut off for a long time.10. Size: 160x42x15mm

Read more less

1. One-click copy, simple operation2. Strong privacy3. Save each key password separately4. Can be reused continuously for 1 million times5. Uses: garage doors, motorcycles, car alarm products, home security products, short-distance wireless remote control products, industrial control products, etc.6. Working voltage: DC12V, one 27A battery (not included)7. Working current: less than or equal to 8mA8. Encoding type: self-copying9. Modulation method: ASK (AM)10. Transmitting power: ≤100mW11. Transmitting distance: 50 -100 m12. Use with the following remote control IC modules (please check your original remote control before ordering), and your remote control should also be a fixed code or a learning code. 2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers), 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HT6026 , HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT6P20D, 12L-4SC, PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211, HCS101, HCS200, HCS201, HCS300 , HCS301 (partial code)How to program:1. Please clear the test code before copying: press the above 2 buttons at the same time until the LED light flashes 3 times quickly, then release any button (the other is kept pressed), and then press the button 3 times, the LED light After flashing quickly, release the two buttons. When you press any button, the LED will not light up, which means you have deleted the code2. Learn the code: press and hold the buttons on the remote control, the same is true for the buttons on the remote control, keep them close to the receiving signal for 3 seconds, the LED light will flash quickly and then stay on, then release the button. Try to press this button, the LED light will light up, indicating that you have successfully copied. Do the same steps for the other buttons3. Recovery function: If you accidentally delete the useful code, you can press the 3rd&4th button at the same time until the LED light flashes 3 times quickly, the recovery is successful4. Now the programming is successful: if you want to program more buttons, just repeat step 2 greater than 4. It's that simple! To reset the remote control, just restart step

Read more less

1. Using SAW devices to stabilize the frequency, 6.5G ultra-high frequency triode, to meet all aspects and levels of application2. Scope of application: car, motorcycle anti-theft device, family anti-theft alarm, various remote control, electric curtain, rolling door, parking lot barrier control, etc.3. Working voltage: 12V4. Working current: 10mA5. Transmission distance: 200 meters6. Modulation method: ASK7. Size: 92x41x12mm8. Battery specification: 23A 12V battery (not included)

Read more less

1. One-click copy, simple operation2. Strong privacy3. Save each key password separately4. Can be reused continuously for 1 million times5. Uses: garage doors, motorcycles, car alarm products, home security products, short-distance wireless remote control products, industrial control products, etc.6. Working voltage: DC12V, one 27A battery (not included)7. Working current: less than or equal to 8mA8. Encoding type: self-copying9. Modulation method: ASK (AM)10. Transmitting power: ≤100mW11. Transmitting distance: 50 -100 m12. Use with the following remote control IC modules (please check your original remote control before ordering), and your remote control should also be a fixed code or a learning code. 2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers), 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HT6026 , HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT6P20D, 12L-4SC, PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211, HCS101, HCS200, HCS201, HCS300 , HCS301 (partial code)How to program:1. Please clear the test code before copying: press the above 2 buttons at the same time until the LED light flashes 3 times quickly, then release any button (the other is kept pressed), and then press the button 3 times, the LED light After flashing quickly, release the two buttons. When you press any button, the LED will not light up, which means you have deleted the code2. Learn the code: press and hold the buttons on the remote control, the same is true for the buttons on the remote control, keep them close to the receiving signal for 3 seconds, the LED light will flash quickly and then stay on, then release the button. Try to press this button, the LED light will light up, indicating that you have successfully copied. Do the same steps for the other buttons3. Recovery function: If you accidentally delete the useful code, you can press the 3rd&4th button at the same time until the LED light flashes 3 times quickly, the recovery is successful4. Now the programming is successful: if you want to program more buttons, just repeat step 2 greater than 4. It's that simple! To reset the remote control, just restart step

Read more less

1. Using SAW devices to stabilize the frequency, 6.5G ultra-high frequency triode, to meet all aspects and levels of application2. Scope of application: car, motorcycle anti-theft device, family anti-theft alarm, various remote control, electric curtain, rolling door, parking lot barrier control, etc.3. Working voltage: 12V4. Working current: 10mA5. Transmission distance: 200 meters6. Modulation method: ASK7. Size: 92x41x12mm8. Battery specification: 23A 12V battery (not included)

Read more less

1. Working voltage: DC 3V, 1 2032 button battery2. Number of keys: 43. Transmission rate: less than 20mA4. Modulation method: ASK5. Remote control distance: about 25 meters in a non-interference environment6. Rubber buttons, soft, non-slip and silent7. Hidden LED lights, the operating status is well known8. Adopt SA901B main control chip, support online programming, can burn repeatedly, built-in EEPROM, can copy the same frequency of other ordinary remote control, can clear the code at any time, convenient and fast speed9. Can be used in automobile remote control, lighting control, smart home remote control and other fields10. Size: 60x37.41.4mm11. Weight: 25gFunction:1. Copy code operation: If the remote control has a code, you need to clear the code to correct the code. Code matching operation: press the single button of the copied remote control and the copied remote control at the same time, until the indicator light of the copied remote control changes from fast flashing to steady on, then release the two remote control keys, the code matching is successful . Other keys are also operated in this way until all keys are copied2. Clear code operation: press and hold the lock and unlock buttons of the copy remote control at the same time until the indicator light flashes 3 times, then short press the unlock button 3 times. The indicator light keeps flashing, indicating that the code is cleared successfully (the unlock button has been pressed during this process)3. Recovery code operation: press and hold the mute button and ring button of the copy remote control at the same time, until the indicator light flashes, you can recover the remote control password that was cleared before

Read more less

1. Using SAW devices to stabilize the frequency, 6.5G ultra-high frequency triode, to meet all aspects and levels of application2. Scope of application: car, motorcycle anti-theft device, family anti-theft alarm, various remote control, electric curtain, rolling door, parking lot barrier control, etc.3. Working voltage: 12V4. Working current: 10mA5. Transmission distance: 200 meters6. Modulation method: ASK7. Size: 92x41x12mm8. Battery specification: 23A 12V battery (not included)

Read more less

1. Working voltage: DC 3V, 1 2032 button battery2. Number of keys: 43. Transmission rate: less than 20mA4. Modulation method: ASK5. Remote control distance: about 25 meters in a non-interference environment6. Rubber buttons, soft, non-slip and silent7. Hidden LED lights, the operating status is well known8. Adopt SA901B main control chip, support online programming, can burn repeatedly, built-in EEPROM, can copy the same frequency of other ordinary remote control, can clear the code at any time, convenient and fast speed9. Can be used in automobile remote control, lighting control, smart home remote control and other fields10. Size: 60x37.41.4mm11. Weight: 25gFunction:1. Copy code operation: If the remote control has a code, you need to clear the code to correct the code. Code matching operation: press the single button of the copied remote control and the copied remote control at the same time, until the indicator light of the copied remote control changes from fast flashing to steady on, then release the two remote control keys, the code matching is successful . Other keys are also operated in this way until all keys are copied2. Clear code operation: press and hold the lock and unlock buttons of the copy remote control at the same time until the indicator light flashes 3 times, then short press the unlock button 3 times. The indicator light keeps flashing, indicating that the code is cleared successfully (the unlock button has been pressed during this process)3. Recovery code operation: press and hold the mute button and ring button of the copy remote control at the same time, until the indicator light flashes, you can recover the remote control password that was cleared before

Read more less

1. Using SAW devices to stabilize the frequency, 6.5G ultra-high frequency triode, to meet all aspects and levels of application2. Scope of application: car, motorcycle anti-theft device, family anti-theft alarm, various remote control, electric curtain, rolling door, parking lot barrier control, etc.3. Working voltage: 12V4. Working current: 10mA5. Transmission distance: 200 meters6. Modulation method: ASK7. Size: 92x41x12mm8. Battery specification: 23A 12V battery (not included)

Read more less

1. Material: PC + brushed aluminum alloy + infrared lens2. Power mode: USB3. Wireless distance: 8 meters without blocking4. Additional function: DIY learning function5. Operation mode: wifi mobile phone control6. Cloud massive infrared code library (continuously updated), one-key pairing of home appliances7. Bind the Tuya App through the smart speaker to realize voice control of home appliances8. Compatible platforms: Tuya, Tmall Genie, google home, alexa, ifttt, etc.9. According to personal habits, the appliance can be turned on/off regularly or switched to the designated working mode, so that the appliance has a biological clock10. A series of remote control commands can be set to form a scene, click this scene to trigger all commands, control multiple appliances with one key, and redefine comfortable life11. It can control electrical appliances such as set-top boxes, network boxes, TVs, air conditioners, electric fans, DVDs, etc. It is compatible with most brands on the market, but it is not compatible with electrical appliances that use radio frequency and bluetooth remote controls12. Product weight: about 73g13. Product size: 80x80x40mmThe package contains:Remote control x 1Data cable x 1Base x 1Screw Pack x 1Manual x 1

Read more less

1. Infrared voice remote control, voice interaction, responsive, built-in learning, memory algorithm, integrating several infrared remote control into voice control2. Built-in massive infrared code library, widely compatible with various brands of air conditioners/set-top boxes/TVs3. Plug and play, no WIFI, no APP, voice control, built-in night light function4. It is recommended to keep the control range of the voice infrared remote control and (TV/air conditioner/set-top box/fan, etc.) within 9 meters5. Working temperature: 0-40 degrees Celsius6. Use environment: indoor7. Weight: 15g8. Dimensions: 48 x 36 x 16mm9. Note: Home appliances with infrared remote control are required to upgrade to voice control

Read more less

1. Intelligent voice remote control, free hands, can connect the air conditioner, TV, set-top box, fan and lamps in the room at the same time.2. Using voice recognition technology, you can voice control home appliances without apps, WiFi or internet.3. The mini compact design makes this remote control not take up much space in your daily use.4. Made of ABS material, high hardness, high strength and durable.5. Provide a lot of convenience for you to control household appliances, avoid too much inconvenience caused by remote control, key failure and battery dead. Support plug and play.6. Net weight: 19+/-2G7. Dimensions: Approx. 7 x 4.4 x 1.6 cm / 2.75 x 1.73 x 0.63 inches8. Power supply mode: USB DC 5V 1A power supply9. Transmission distance: 5m

Read more less

1. APP control: Use Tuya Smart or Smart Life app to control infrared devices anytime, anywhere. Turn your essential home devices into smart devices to make life smarter and more convenient.2. Support almost all infrared control devices, support 38KHz frequency signal learning, including your air conditioner, TV, set-top box, DVD, infrared motorized curtains, etc. Has a huge IR database.3. Voice Control: Compatible with Amazon Alexa, Google Home to control your TV, set-top box, air conditioner and fan by voice. The device only supports 2.4G WiFi.4. Support intelligent scene control, with timing function: You can set a timer to turn on/off your infrared electronic device.5. Power input: DC5V/1A6. Infrared frequency: 38kHz7. Coverage: 360 degrees8. Wireless standard: WIFI 2.4G 802.11 b/g/n9. Control method: Mobile App "Tuya/SmartLife"10. App compatibility: Android 4.0/iOS 8.0 or above11. Material: PC/ABS12. Operating temperature: -10 - 50 degrees Celsius13. Working humidity: less than or equal to 85% RH

Read more less

1. Material: ABS, electronic components2. Supported equipment: air conditioner, TV, fan, DVD3. Standby power: 0.5W4. Control distance: 8 meters5. Infrared frequency: 38KHZ6. Working temperature: 0-50 degrees Celsius7. Working humidity: 80%8. Battery: AA battery x 2 (shipping without battery)9. Dimensions: 6.8 x 6.8 x 2.7 cm

Read more less

1. One key to wake up the host, key backlight, action activation2. Through infrared remote control, no need to pair3. Built-in sensor, when the remote control is moved or picked up, the button backlight will automatically light up to help you find the desired function4. Connection method: infrared5. Power supply mode: 2 AAA batteries (not included in the product)6. Applicable products: for Xbox / Xbox Series X S / Xbox one series7. Size: Long section: 197.5x48mm, Short section: 134.25x48mm8. Weight: long: 95g, short: 68g

Read more less

1. Emission intensity: 70-90mW/Sr2. Launch angle: 30 degrees3. Remote control distance: 8-15 meters4. Applicable mobile phone interface: Type-C, 8 Pin5. Applicable products: iOS, Android6. Applicable to: remote control of infrared electrical appliances such as air conditioners, TV set-top boxes, cameras, projectors, fans, etc.7. Infrared wavelength: 940nm8. Transmission frequency: 38Khz 56Khz9. Infrared, no bluetooth, faster connection, stronger compatibility10. Smaller and safer, smoother unplugging, no damage to the phone port11. With keychain design, easy to carry around12. Surface CNC groove touch, smooth and more comfortable13. Length: 26mm14. Weight: 3.6 grams

Read more less

1. Support all infrared devices, including air conditioner, TV, fan, DVD player, etc 2. Support Amazon Alexa/Echo/Dot/Google Home3. Learning (DIY) - controls all devices that use infrared signals;4. USB power supply: 5V 1A 5. Infrared frequency: 38-56Khz6. Infrared distance: 7m7. Infrared angle: 360 degrees8. Max current: 110mA9. Max power: 0.55W 10. Wireless Type: 2.4GHz11. Protocol: IEEE 802.11b/g/n12. Wireless range: 45m13. Product size(D*W*H): 60 x 60 x 19mm

Read more less

1. Supports all IR devices including air conditioners, TVs, LEDs, Fans, DVD players, etc.2. Support some Tuya RF devices3. Voice control4. Learning function (DIY) - controls the devices that use infrared signals5. Power supply: DC 5V / 1A6. Power interface: micro USB7. Wi-Fi type: 2.4GHz8. Wi-Fi standard: IEEE 802.11b/g/n9. Wireless range: 45m10. Working current: 800mA11. Standby current: 40mA12. Infrared remote control distance: 8m13. RF frequency: 315 - 433 MHz14. Bluetooth version: Bluetooth 5.015. Operating temperature: -10 - 60 degrees Celsius16. Operating humidity: 0 - 90%RH (no condensation)17. Product size(D*W*H): 60 x 60 x 19mm

Read more less

1. Support all infrared devices, including air conditioner, TV, fan, DVD player, etc 2. Support Amazon Alexa/Echo/Dot/Google Home3. Learning (DIY) - controls all devices that use infrared signals;4. USB power supply: 5V 1A 5. Infrared frequency: 38-56Khz6. Infrared distance: 7m7. Infrared angle: 360 degrees8. Max current: 110mA9. Max power: 0.55W 10. Wireless Type: 2.4GHz11. Protocol: IEEE 802.11b/g/n12. Wireless range: 45m13. Product size(D*W*H): 60 x 60 x 19mm

Read more less

1. Chips that can be copied: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) , 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the microcontroller 2. How to clear the code: Press and hold the unlock and lock buttons at the same time (some shells have the up and down buttons), the LED indicator flashes three times, release any of the pressed buttons, the other is not loose, click to release Press the button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared. After the data is cleared, the remote control, no matter which button is pressed, the LED indicator will not light up. 3. Duplicating method: hold the original remote control in one hand, and the duplicating remote control in the other, and place the two remote controls as close as possible. For the keys that need to be copied, the LED indicator flashes quickly three times and then flashes quickly. The copying is successful. The operation methods of other keys are the same. Some remote controls have low transmission power, so the original remote control and the duplicating remote control should be operated back to back for duplicating. If there is interference in some operating environments, the interference operation should be avoided. 4. Frequency: 433MHZ 5. Remote control distance: 50-100 meters 6. Material: PC 7. Dimensions: 60 x 37 x 12mm 8. Weight: 19g

Read more less

1. Chips that can be copied: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) , 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the microcontroller 2. How to clear the code: Press and hold the unlock and lock buttons at the same time (some shells have the up and down buttons), the LED indicator flashes three times, release any of the pressed buttons, the other is not loose, click to release Press the button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared. After the data is cleared, the remote control, no matter which button is pressed, the LED indicator will not light up. 3. Duplicating method: hold the original remote control in one hand, and the duplicating remote control in the other, and place the two remote controls as close as possible. For the keys that need to be copied, the LED indicator flashes quickly three times and then flashes quickly. The copying is successful. The operation methods of other keys are the same. Some remote controls have low transmission power, so the original remote control and the duplicating remote control should be operated back to back for duplicating. If there is interference in some operating environments, the interference operation should be avoided. 4. Frequency: 433MHZ 5. Remote control distance: 50-100 meters 6. Material: PC 7. Dimensions: 60 x 37 x 12mm 8. Weight: 19g

Read more less

1. Chips that can be copied: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) , 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the microcontroller 2. How to clear the code: Press and hold the unlock and lock buttons at the same time (some shells have the up and down buttons), the LED indicator flashes three times, release any of the pressed buttons, the other is not loose, click to release Press the button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared. After the data is cleared, the remote control, no matter which button is pressed, the LED indicator will not light up. 3. Duplicating method: hold the original remote control in one hand, and the duplicating remote control in the other, and place the two remote controls as close as possible. For the keys that need to be copied, the LED indicator flashes quickly three times and then flashes quickly. The copying is successful. The operation methods of other keys are the same. Some remote controls have low transmission power, so the original remote control and the duplicating remote control should be operated back to back for duplicating. If there is interference in some operating environments, the interference operation should be avoided. 4. Frequency: 315MHZ 5. Remote control distance: 50-100 meters 6. Material: PC 7. Dimensions: 60 x 37 x 12mm 8. Weight: 19g

Read more less

1. Chips that can be copied: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) , 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the microcontroller 2. How to clear the code: Press and hold the unlock and lock buttons at the same time (some shells have the up and down buttons), the LED indicator flashes three times, release any of the pressed buttons, the other is not loose, click to release Press the button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared. After the data is cleared, the remote control, no matter which button is pressed, the LED indicator will not light up. 3. Duplicating method: hold the original remote control in one hand, and the duplicating remote control in the other, and place the two remote controls as close as possible. For the keys that need to be copied, the LED indicator flashes quickly three times and then flashes quickly. The copying is successful. The operation methods of other keys are the same. Some remote controls have low transmission power, so the original remote control and the duplicating remote control should be operated back to back for duplicating. If there is interference in some operating environments, the interference operation should be avoided. 4. Frequency: 433MHZ 5. Remote control distance: 50-100 meters 6. Material: PC 7. Dimensions: 60 x 37 x 12mm 8. Weight: 19g

Read more less

1. Emission intensity: 70-90mW/Sr2. Launch angle: 30 degrees3. Remote control distance: 8-15 meters4. Applicable mobile phone interface: Type-C, 8 Pin5. Applicable products: iOS, Android6. Applicable to: remote control of infrared electrical appliances such as air conditioners, TV set-top boxes, cameras, projectors, fans, etc.7. Infrared wavelength: 940nm8. Transmission frequency: 38Khz 56Khz9. Infrared, no bluetooth, faster connection, stronger compatibility10. Smaller and safer, smoother unplugging, no damage to the phone port11. With keychain design, easy to carry around12. Surface CNC groove touch, smooth and more comfortable13. Length: 26mm14. Weight: 3.6 grams

Read more less

1. Emission intensity: 70-90mW/Sr2. Launch angle: 30 degrees3. Remote control distance: 8-15 meters4. Applicable mobile phone interface: Type-C, 8 Pin5. Applicable products: iOS, Android6. Applicable to: remote control of infrared electrical appliances such as air conditioners, TV set-top boxes, cameras, projectors, fans, etc.7. Infrared wavelength: 940nm8. Transmission frequency: 38Khz 56Khz9. Infrared, no bluetooth, faster connection, stronger compatibility10. Smaller and safer, smoother unplugging, no damage to the phone port11. With keychain design, easy to carry around12. Surface CNC groove touch, smooth and more comfortable13. Length: 26mm14. Weight: 3.6 grams

Read more less

1. Emission intensity: 70-90mW/Sr2. Launch angle: 30 degrees3. Remote control distance: 8-15 meters4. Applicable mobile phone interface: Type-C, 8 Pin5. Applicable products: iOS, Android6. Applicable to: remote control of infrared electrical appliances such as air conditioners, TV set-top boxes, cameras, projectors, fans, etc.7. Infrared wavelength: 940nm8. Transmission frequency: 38Khz 56Khz9. Infrared, no bluetooth, faster connection, stronger compatibility10. Smaller and safer, smoother unplugging, no damage to the phone port11. With keychain design, easy to carry around12. Surface CNC groove touch, smooth and more comfortable13. Length: 26mm14. Weight: 3.6 grams

Read more less

1. Emission intensity: 70-90mW/Sr2. Launch angle: 30 degrees3. Remote control distance: 8-15 meters4. Applicable mobile phone interface: Type-C, 8 Pin5. Applicable products: iOS, Android6. Applicable to: remote control of infrared electrical appliances such as air conditioners, TV set-top boxes, cameras, projectors, fans, etc.7. Infrared wavelength: 940nm8. Transmission frequency: 38Khz 56Khz9. Infrared, no bluetooth, faster connection, stronger compatibility10. Smaller and safer, smoother unplugging, no damage to the phone port11. With keychain design, easy to carry around12. Surface CNC groove touch, smooth and more comfortable13. Length: 26mm14. Weight: 3.6 grams

Read more less

1. Emission intensity: 70-90mW/Sr2. Launch angle: 30 degrees3. Remote control distance: 8-15 meters4. Applicable mobile phone interface: Type-C, 8 Pin5. Applicable products: iOS, Android6. Applicable to: remote control of infrared electrical appliances such as air conditioners, TV set-top boxes, cameras, projectors, fans, etc.7. Infrared wavelength: 940nm8. Transmission frequency: 38Khz 56Khz9. Infrared, no bluetooth, faster connection, stronger compatibility10. Smaller and safer, smoother unplugging, no damage to the phone port11. With keychain design, easy to carry around12. Surface CNC groove touch, smooth and more comfortable13. Length: 26mm14. Weight: 3.6 grams

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

1. Wireless remote control with 433mHz frequency, metal case2. Support 4 button remote control, one-to-many3. Working frequency: 433MHz frequency4. Working current: less than or equal to 12mA5. Working voltage: DC12V6. Transmitting power: less than or equal to 10mW7. Launch distance: 150 meters (open space)8. Operation mode: button type9. Frequency deviation: 0.2MHz10. Transmission rate: 50--60KHZ11. Oscillating resistance: 340k12. Working chips: 152713. Material: metal

Read more less

1. Battery: Contains 23A 12V battery2. Optional frequency: 433MHz3. Working voltage: 5V4. Working distance: 50 meters5. Applicable chips: all fixed code chips6. Scope of application: various types of rolling shutter doors, telescopic doors, garage door barriers, etc.7. CD technology button, four-button simple control, can also be used by the elderly and children8. Upgraded transmitter chip, the signal is more stable, strong penetration, immediate response, and longer operating distance9. Waterproof, not easy to damage, durable10. Dimensions: 65x40x16mm11. Weight: about 28 gramsCoding instructions:1. Use a screwdriver to unscrew the back shell of the new DIP remote control and take out the PCBA board inside. There are 8 DIP switches on it. Each code is divided into upper, middle and lower2. Find the code table on the back of the original remote control or controller and follow the 8 code positions of the original code table. Turn the dial switch corresponding to the code table. When the codes are consistent, it can be used

Read more less

Feature: 1. The remote control can be paired as a TV controller. 2. Laser profiler function. 3. Built-in USB receiver, plug and play, easy to use. 4. The remote control is a 3-in-1 controller with wireless air mouse, wireless keyboard and infrared remote control. Specification: 1. Number of keys: 18. 2. Transmission mode: IR / wireless RF. 3. Frequency: 38KHz/2.4GHz. 4. Agreement: HID. 5. Infrared function: Optional. 6. Number of axes: 6 axes. 7. Battery type: 1 x AAA battery. 8. Working voltage: 3.5V-4.2V. 9. Power consumption: Less than 25mAh.

Read more less

1. Superior metal body provides strength and durability. 2. It has code lock function, data regeneration function, one key intelligent copy function. 3. Handy key chain size attaches to your car keys no more unwanted bulkiness. It can copy the IC model of original remote control is 2262/2260/PT2264 and etc. 4. High speed and high accuracy, the code is not easy to loss. 5. Scope of application: vehicle central locking systems, garage doors, electronic gates, electrical appliances, car sunroofs and etc. 6. Frequency:315MHZ/433MHZ

Read more less

1. Superior metal body provides strength and durability. 2. It has code lock function, data regeneration function, one key intelligent copy function. 3. Handy key chain size attaches to your car keys no more unwanted bulkiness. It can copy the IC model of original remote control is 2262/2260/PT2264 and etc. 4. High speed and high accuracy, the code is not easy to loss. 5. Scope of application: vehicle central locking systems, garage doors, electronic gates, electrical appliances, car sunroofs and etc. 6. Frequency:315MHZ/433MHZ

Read more less

1. Superior metal body provides strength and durability. 2. It has code lock function, data regeneration function, one key intelligent copy function. 3. Handy key chain size attaches to your car keys no more unwanted bulkiness. It can copy the IC model of original remote control is 2262/2260/PT2264 and etc. 4. High speed and high accuracy, the code is not easy to loss. 5. Scope of application: vehicle central locking systems, garage doors, electronic gates, electrical appliances, car sunroofs and etc. 6. Frequency:315MHZ/433MHZ

Read more less

1. Superior metal body provides strength and durability. 2. It has code lock function, data regeneration function, one key intelligent copy function. 3. Handy key chain size attaches to your car keys no more unwanted bulkiness. It can copy the IC model of original remote control is 2262/2260/PT2264 and etc. 4. High speed and high accuracy, the code is not easy to loss. 5. Scope of application: vehicle central locking systems, garage doors, electronic gates, electrical appliances, car sunroofs and etc. 6. Frequency:315MHZ/433MHZ

Read more less

1. Superior metal body provides strength and durability. 2. It has code lock function, data regeneration function, one key intelligent copy function. 3. Handy key chain size attaches to your car keys no more unwanted bulkiness. It can copy the IC model of original remote control is 2262/2260/PT2264 and etc. 4. High speed and high accuracy, the code is not easy to loss. 5. Scope of application: vehicle central locking systems, garage doors, electronic gates, electrical appliances, car sunroofs and etc. 6. Frequency:315MHZ/433MHZ

Read more less