TTGO T-Energy WiFi Wireless Module 18650 Battery Holder ESP32 WROVER Development Board

Description

Features
1. When you do some esp32 projects, you must hate adding power to provide power.
2. This board can solve such problems.
3. 3000mah 18650 battery can make esp32 work normally (no battery included)
4. 18650 charging system integration.
5. Inside the indicator LED (green means all and red means charging)
6. Charging and working can be carried out at the same time.
7. 1 switch can control the power supply.
8. 1 extra LED programmable (done with gpio16)
9. 0.5a charging current 1A output
10. Overcharge protection
11. Over discharge protection
12. Full esp32 pin breakout

Specification
Hardware Specifications
1. Chipset: ESPRESSIF-ESP32-WROVER 240MHz Xtens single-/dual-core 32-bit LX6 microprocessor
2. FLASH: QSPI flash/SRAM, up to 4MB
3. SRAM: 520 kB SRAM
4. KEY: Reset, BOOT
5. Switch: BAT switch
6. Power indicator lamp: Red
7. USB to TTL: CH9102F
8. Modular interface: SD card, UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA pre-amplifier
9. On-board clock: 40MHz crystal oscillator
10. Working voltage: 2.3V-3.6V
11. Working current: About 40mA
12. Sleep current: 1mA
13. Working temperature range: -40 degree C ~ +85 degree C
14. Size: 91.10mm*32.75mm*19.90mm

Power Supply Specifications
1. Power Supply: USB 5V/1A
2. Charging current: 1000mA
3. Battery: 3.7V lithium battery (not included)

WiFi
1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC
2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval
3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M)
4. Transmit Power: 22dBm
5. Communication distance: 300m

Bluetooth
1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard
2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH
3. Audio frequency: CVSD&SBC audio frequency

Software specification
1. WiFi Mode: Station/SoftAP/SoftAP+Station/P2P
2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS
3. Encryption Type: AES/RSA/ECC/SHA
4. Firmware upgrade: UART download/OTA (Through network/host to download and write firmware)
5. Software Development: Support cloud server development / SDK for user firmware development
6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT
7. User Configuration: AT + Instruction set, cloud server, android/iOS app
8. OS: FreeRT OS

TTGO T-Energy WiFi Wireless Module 18650 Battery Holder ESP32 WROVER Development Board

Product form

SKU: DIY5131

  • In stock (Processing Time 1 - 72 hours)

€25,58

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    Features
    1. When you do some esp32 projects, you must hate adding power to provide power.
    2. This board can solve such problems.
    3. 3000mah 18650 battery can make esp32 work normally (no battery included)
    4. 18650 charging system integration.
    5. Inside the indicator LED (green means all and red means charging)
    6. Charging and working can be carried out at the same time.
    7. 1 switch can control the power supply.
    8. 1 extra LED programmable (done with gpio16)
    9. 0.5a charging current 1A output
    10. Overcharge protection
    11. Over discharge protection
    12. Full esp32 pin breakout

    Specification
    Hardware Specifications
    1. Chipset: ESPRESSIF-ESP32-WROVER 240MHz Xtens single-/dual-core 32-bit LX6 microprocessor
    2. FLASH: QSPI flash/SRAM, up to 4MB
    3. SRAM: 520 kB SRAM
    4. KEY: Reset, BOOT
    5. Switch: BAT switch
    6. Power indicator lamp: Red
    7. USB to TTL: CH9102F
    8. Modular interface: SD card, UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA pre-amplifier
    9. On-board clock: 40MHz crystal oscillator
    10. Working voltage: 2.3V-3.6V
    11. Working current: About 40mA
    12. Sleep current: 1mA
    13. Working temperature range: -40 degree C ~ +85 degree C
    14. Size: 91.10mm*32.75mm*19.90mm

    Power Supply Specifications
    1. Power Supply: USB 5V/1A
    2. Charging current: 1000mA
    3. Battery: 3.7V lithium battery (not included)

    WiFi
    1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC
    2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval
    3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M)
    4. Transmit Power: 22dBm
    5. Communication distance: 300m

    Bluetooth
    1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard
    2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH
    3. Audio frequency: CVSD&SBC audio frequency

    Software specification
    1. WiFi Mode: Station/SoftAP/SoftAP+Station/P2P
    2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS
    3. Encryption Type: AES/RSA/ECC/SHA
    4. Firmware upgrade: UART download/OTA (Through network/host to download and write firmware)
    5. Software Development: Support cloud server development / SDK for user firmware development
    6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT
    7. User Configuration: AT + Instruction set, cloud server, android/iOS app
    8. OS: FreeRT OS

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account