Waveshare 4G / 3G / GNSS HAT for Raspberry Pi, LTE CAT4, for North America

Description

4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600A-H

Applicable Region
1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.
2. Please check the supported bands according to your local service provider, select the proper one when placing order.

Overview
1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
2. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.

Features
1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
2. Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
3. Support GPS, BeiDou, Glonass, LBS base station positioning
4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
5. Onboard CP2102 USB to UART converter, for serial debugging
6. Breakout UART control pins, to connect with host boards like Arduino/STM32
7. SIM card slot, supports 1.8V/3V SIM card
8. Onboard audio jack and audio decoder for making telephone call
9. 2x LED indicators, easy to monitor the working status
10. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
11. Baudrate: 300bps ~ 4Mbps (default: 115200bps)
12. Autobauding baudrate: 9600bps ~ 115200bps
13. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
14. Support SIM application toolkit: SAT Class 3, USAT
15. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Communications Specifications
1. Band:
- LTE
-- SIM7600A-H:
--- LTE-FDD B2/B4/B12
-- SIM7600E-H:
--- LTE-FDD B1/B3/B5/B7/B8/B20
--- LTE-TDD B38/B40/B41
-- SIM7600CE-T:
--- LTE-TDD B38/B39/B40/B41
--- LTE-FDD B1/B3/B8
- WCDMA / TD-SCDMA / CDMA 2000
-- SIM7600A-H:
--- UMTS/HSPA+ B2/B5
-- SIM7600E-H:
--- UMTS/HSPA+ B1/B5/B8
-- SIM7600CE-T:
--- UMTS/HSDPA/HSPA+ B1/B8
--- TD-SCDMA B34/B39
--- CDMA 1X/EVDO BC0
- GSM/GPRS/EDGE 900/1800 MHz
2. Generation: 4G, 3G, 2.5G, 2G
3. Emitting power: 0.25W, 0.5W@EGSM900, 0.4W@DCS1800, 2W@GSM900, 1W@DCS1800
4. Data Speed
- LTE CAT 4
-- Uplink=<50 Mbps
-- Downlink=<150 Mbps
- UMTS
-- Uplink=<384Kbps
-- Downlink=<384Kbps
- EDGE
-- Uplink=<236.8kbps
-- Downlink=<236.8kbps
- GPRS
-- Uplink=<85.6kbps
-- Downlink=<85.6kbps
- HSPA+
-- Uplink=<5.76Mbps
-- Downlink=<42Mbps

GNSS Specifications
1. Receiver type
- 16-channel
- C/A code
2. Sensitivity
- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
- Cold starts: -148 dBm
3. Time-To-First-Fix (open air)
- Cold starts: <35s
- Hot starts: <1s
4. Accuracy
- Position: <2.5m CEP

SMS and Audio Specifications
1. SMS
- Support types: MT, MO, CB, Text, PDU
- Storage: USIM card and ME (default)
2. Audio feature
- Support echo cancellation
- Support noise reduction

Other Specifications
1. Power supply: 5V
2. Operating voltage: 5V/3.3V (configured via jumper)
3. Operating temperature: -30 degree C ~ 80 degree C
4. Storage temperature: -45 degree C ~ 90 degree C
5. Dimension: 56.21mm x 65.15mm

What is on Board
1. SIM7600A-H
2. CP2102 USB to UART converter
3. NAU8810 audio decoder
4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
5. MP2128DT power chip
6. MP1482 power chip
7. Raspberry Pi GPIO header: for connecting with Raspberry Pi
8. SIM7600 control interface: for connecting with host boards like Arduino/STM32
9. SIM card slot: supports 1.8V/3V SIM card
10. 3.5mm earphone/mic jack
11. USB interface: for testing AT Commands, getting GPS positioning data, etc.
12. USB to UART interface: for serial debugging, or login to Raspberry Pi
13. MAIN antenna connector
14. AUX antenna connector
15. GNSS antenna connector
16. Power switch
17. Network status indicator
18. Power indicator
19. Operating voltage selection jumper:
- VCCIO - 3.3V: set operating voltage as 3.3V
- VCCIO - 5V: set operating voltage as 5V
20. UART selection jumper:
- A: access Raspberry Pi via USB to UART
- B: control the SIM7600 by Raspberry Pi
- C: control the SIM7600 via USB to UART

Package Contents
1. SIM7600A-H 4G HAT x1
2. LTE Antenna x1
3. GPS External Antenna (B) x1
4. USB type A plug to micro plug cable x2
5. RPi screws pack (2pcs) x1

Waveshare 4G / 3G / GNSS HAT for Raspberry Pi, LTE CAT4, for North America

Product form

SKU: ZY15598778

  • In stock (Processing Time 1 - 72 hours)

€121,20

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600A-H

    Applicable Region
    1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.
    2. Please check the supported bands according to your local service provider, select the proper one when placing order.

    Overview
    1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
    2. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.

    Features
    1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
    2. Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
    3. Support GPS, BeiDou, Glonass, LBS base station positioning
    4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
    5. Onboard CP2102 USB to UART converter, for serial debugging
    6. Breakout UART control pins, to connect with host boards like Arduino/STM32
    7. SIM card slot, supports 1.8V/3V SIM card
    8. Onboard audio jack and audio decoder for making telephone call
    9. 2x LED indicators, easy to monitor the working status
    10. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
    11. Baudrate: 300bps ~ 4Mbps (default: 115200bps)
    12. Autobauding baudrate: 9600bps ~ 115200bps
    13. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
    14. Support SIM application toolkit: SAT Class 3, USAT
    15. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Communications Specifications
    1. Band:
    - LTE
    -- SIM7600A-H:
    --- LTE-FDD B2/B4/B12
    -- SIM7600E-H:
    --- LTE-FDD B1/B3/B5/B7/B8/B20
    --- LTE-TDD B38/B40/B41
    -- SIM7600CE-T:
    --- LTE-TDD B38/B39/B40/B41
    --- LTE-FDD B1/B3/B8
    - WCDMA / TD-SCDMA / CDMA 2000
    -- SIM7600A-H:
    --- UMTS/HSPA+ B2/B5
    -- SIM7600E-H:
    --- UMTS/HSPA+ B1/B5/B8
    -- SIM7600CE-T:
    --- UMTS/HSDPA/HSPA+ B1/B8
    --- TD-SCDMA B34/B39
    --- CDMA 1X/EVDO BC0
    - GSM/GPRS/EDGE 900/1800 MHz
    2. Generation: 4G, 3G, 2.5G, 2G
    3. Emitting power: 0.25W, 0.5W@EGSM900, 0.4W@DCS1800, 2W@GSM900, 1W@DCS1800
    4. Data Speed
    - LTE CAT 4
    -- Uplink=<50 Mbps
    -- Downlink=<150 Mbps
    - UMTS
    -- Uplink=<384Kbps
    -- Downlink=<384Kbps
    - EDGE
    -- Uplink=<236.8kbps
    -- Downlink=<236.8kbps
    - GPRS
    -- Uplink=<85.6kbps
    -- Downlink=<85.6kbps
    - HSPA+
    -- Uplink=<5.76Mbps
    -- Downlink=<42Mbps

    GNSS Specifications
    1. Receiver type
    - 16-channel
    - C/A code
    2. Sensitivity
    - Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
    - Cold starts: -148 dBm
    3. Time-To-First-Fix (open air)
    - Cold starts: <35s
    - Hot starts: <1s
    4. Accuracy
    - Position: <2.5m CEP

    SMS and Audio Specifications
    1. SMS
    - Support types: MT, MO, CB, Text, PDU
    - Storage: USIM card and ME (default)
    2. Audio feature
    - Support echo cancellation
    - Support noise reduction

    Other Specifications
    1. Power supply: 5V
    2. Operating voltage: 5V/3.3V (configured via jumper)
    3. Operating temperature: -30 degree C ~ 80 degree C
    4. Storage temperature: -45 degree C ~ 90 degree C
    5. Dimension: 56.21mm x 65.15mm

    What is on Board
    1. SIM7600A-H
    2. CP2102 USB to UART converter
    3. NAU8810 audio decoder
    4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
    5. MP2128DT power chip
    6. MP1482 power chip
    7. Raspberry Pi GPIO header: for connecting with Raspberry Pi
    8. SIM7600 control interface: for connecting with host boards like Arduino/STM32
    9. SIM card slot: supports 1.8V/3V SIM card
    10. 3.5mm earphone/mic jack
    11. USB interface: for testing AT Commands, getting GPS positioning data, etc.
    12. USB to UART interface: for serial debugging, or login to Raspberry Pi
    13. MAIN antenna connector
    14. AUX antenna connector
    15. GNSS antenna connector
    16. Power switch
    17. Network status indicator
    18. Power indicator
    19. Operating voltage selection jumper:
    - VCCIO - 3.3V: set operating voltage as 3.3V
    - VCCIO - 5V: set operating voltage as 5V
    20. UART selection jumper:
    - A: access Raspberry Pi via USB to UART
    - B: control the SIM7600 by Raspberry Pi
    - C: control the SIM7600 via USB to UART

    Package Contents
    1. SIM7600A-H 4G HAT x1
    2. LTE Antenna x1
    3. GPS External Antenna (B) x1
    4. USB type A plug to micro plug cable x2
    5. RPi screws pack (2pcs) x1

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Login

    Forgot your password?

    Don't have an account yet?
    Create account